796767
14
Zoom out
Zoom in
Previous page
1/21
Next page
- 33 -
5. Remove the door from the device.
6. Unscrew the upper fastening (6). Be careful with the plastic plate under the
fastening.
7. Rotate the fastening (6) and plastic plate 180° then screw in at the two o penings
next to each other on the other side of the device.
8. Remove the lower shield panel (1).
9. Unscrew the fastening with (2) pin.
10. Unscrew the pin and washer from the fastening, then screw it into the opening at
the other side of the fastening.
11. Remove the fastening (7) and replace it with the fastening (2) with pin.
12. Place the fastening (7) in the previous location of the fastening (2).
13. Place the door on the fastening pin (2). Attention! Hold on to the door.
14. Replace the fastening pin (6) in the door.
15. Cover the fastening and open holes using the shields (c).
16. Remove the shield (10) from the shield panel (1) and place it on the other side.
17. Replace the shield panel (1) on the device.
18. To mount the handle at the other side of the door, remove the screw caps (a)
and plugs (b).
19. Unscrew the screws from the door handle. Place the handle on the other side of
the door. Insert the plugs into the remaining openings in the door, and place the
screw caps on the screw.
5.3 Operation
Before first use!
Before first use, clean the device (6.2 „Cleaning“).
Connect the device to a single, grounded outlet.
The green standby light will come on. The fan will come on and operate without
interruption.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher 200LN - 700341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher 200LN - 700341 in the language / languages: English as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher 200LN - 700341

Bartscher 200LN - 700341 User Manual - German - 21 pages

Bartscher 200LN - 700341 User Manual - Dutch - 21 pages

Bartscher 200LN - 700341 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info