796767
11
Zoom out
Zoom in
Previous page
1/21
Next page
- 30 -
5.2 Installation and connection
Preparing the device for use
NOTE!
Two people are needed to set the device up!
Remove packing material from the device.
Remove the device from its foam base. Remove all packing tape. If there is any
Styrofoam between the rear wall of the device and the condenser, remove it as well.
Attention! The deep freezer is equipped with a rotating door handle. To avoid
dislodging the handle, do not use it to lift or to move the device.
During setup, the front portion of the device can be tilted slightly backwards in order
to make it easier to transport the device on wheels to another location.
Remove the red adhesive tape strips which are only necessary during transport.
Attention: after opening the door a small, red element will fall out – this is only
needed during transport.
All packing materials should be turned over for recycling.
Remove the two spacers (1) and place
them in the guides (2) at the top of the
device’s rear wall (fig. 1).
Fig. 1
Setup
Place the device in a dry area with good ventilation.
Never place the device on a flammable surface.
Do not place the device near an open flame, electric oven or other source of heat,
as well as in direct sunlight. Heat may damage the device’s surface and lead to
reduced efficiency.
To avoid damage to the compressor, during transport and setup do not tilt the deep
freezer further than 45°. Be careful in handling th e condenser and door of the device
as damage to either element will result in problems using the device.
CAUTION!
Do not place nor use the device in unheated spaces nor on a balcony!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bartscher 200LN - 700341 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bartscher 200LN - 700341 in the language / languages: English as an attachment in your email.

The manual is 0.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bartscher 200LN - 700341

Bartscher 200LN - 700341 User Manual - German - 21 pages

Bartscher 200LN - 700341 User Manual - Dutch - 21 pages

Bartscher 200LN - 700341 User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info