658717

BandG WTP3 Manual

96
Zoom out
Zoom in
Previous page
1/102
Next page
94
Diagnostic Messages via Terminal
On boot the terminal window will display several messages detailing the boot up and conguration le load of
the unit, these are summarized below. If you require support on a WTP3 installation it is helpful to have a copy of
the conguration les in use and a log of a system boot to send to the WTP support specialist.
Error Types
Error messages are categorised into four types:
• Info
• Warning
• Critical
• Fatal
Info
General message displayed for information, e.g. software version number
Warning
An indication that a conguration error exists. The error does not need the system to stop, but requires user
attention.
For example, if a conguration le calls for a device that is not visible on the network:
Warning: nmeain.d : Serial Device 15 on CAN Channel 1 does not exist
Critical
An indication that an error exists that requires immediate user attention. Critical errors will not stop the system,
but the system is unlikely to operate correctly until the issue is resolved.
Fatal
Fatal errors will stop the WTP3 application from running. FTP access is normally retained. The user must rectify
the issue to use WTP3.
For example, if the le directory referred to in wtp_cong.d for the user les does not exist:
Fatal : Cong File Path does not exist : mydirectory
Conguration Consistency
At startup the system will attempt to cross reference the cong les for validity, ensuring the user has not:
• called the same COM port in multiple les, using dierent port settings
• called the same COM port in multiple les with dierent functions (e.g compass and GPS)
• assigned multiple analogue inputs to a single variable
In this case the system will output Warning messages to the user, as per the following examples:
Heel1 MHU_A_B Multiple Analogue Denition : 0 1 2
• “heel1” and “mhu_a_b” functions have been congured to the same port (channel 0, device 1, port 2):
… 96 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info