658717
94
Zoom out
Zoom in
Previous page
1/102
Next page
92
Upgrading the WTP3 Software
CPU
To upgrade your WTP3 CPU Software to the latest version all you will need is the .upd  le (upgrade  le) and a
USB memory stick. (Must be FAT or FAT32 format, NTFS is not supported)
1. Save .upd  le to a USB Stick
2. Turn o power to the WTP CPU
3. Place USB stick into the USB port in the front of the CPU
4. Turn on power to the WTP CPU
5. The CPU will automatically recognise the .upd  le and begin the upgrade process
6. To indicate the upgrade is in progress the LOG LED on the top of the CPU will  ash green
7. When the LOG LED turns solid green the upgrade process is complete
8. Remove the USB stick, the CPU will automatically reboot
Note: A solid red light on the LOG LED indicates the upgrade was unsuccessful. Check your .upd  le , USB stick and
repeat the process. If you continue to experience diffi culties updating the software please seek assistance from a B&G
WTP specialist.
Module
To upgrade a module to the latest software version you will need to use the Navico Software Upgrade Tool.
Follow the Navico SWUP (Software Upgrade) tool procedure)
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BandG WTP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BandG WTP3 in the language / languages: English as an attachment in your email.

The manual is 7,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info