784764
28
Zoom out
Zoom in
Previous page
1/35
Next page
Sensor-Related Messages
Sensors are out of sync – M015**
The temperature sensors may be out of sync by 3°F.
Call for Service if this message does not disappear
within a few minutes.
Sensors are out of sync
-- Call for service* – M026**
The temperature sensors ARE out of sync. The fault
above has been established for at least 1 hour.
Call for Service.
Sensor A Fault, Senor B Fault
– Sensor A: M031**, Sensor B: M032**
A temperature sensor or sensor circuit has failed.
Call for Service.
System-Related Messages
Program memory failure* – M022**
At Power-Up, the system has failed the Program
Checksum Test. This indicates a problem with the
rmware(operationprogram)andrequiresa
service call.
The settings have been reset
(Persistent Memory Error)* – M021**
Contact your dealer or service organization if this
message appears on more than one power-up.
The clock has failed* – M020**
Contact your dealer or service organization.
Conguration error
The spa will not Start Up. Contact your dealer or
service organization.
The GFCI test failed
(System Could Not Test the GFCI) – M036**
(North America Only) May indicate an unsafe
installation. Contact your dealer or service organization.
A pump may be stuck on – M034**
Water may be overheated. POWER DOWN THE SPA.
DO NOT ENTER THE WATER. Contact your dealer or
service organization.
Hot fault – M035**
A Pump Appears to have been Stuck ON when spa
was last powered POWER DOWN THE SPA. DO NOT
ENTER THE WATER. Contact your dealer or service
organization.
Reminder Messages
Reminder messages can be reset from the panel. Press
the Clear Icon to reset the Reminder message.
General maintenance helps
Reminder Messages can be suppressed by using the
Reminders Screen. Reminder Messages can be chosen
individually by the Manufacturer. They may be disabled
entirely, or there may be a limited number of reminders
onaspecicmodel.Thefrequencyofeachreminder
(i.e.7days)canbespeciedbytheManufacturer.
Check the pH
May appear on a regular schedule, i.e. every 7 days.
Check pH with a test kit and adjust pH with the
appropriate chemicals.
Check the sanitizer
May appear on a regular schedule, i.e. every 7 days.
Check sanitizer level and other water chemistry with a
test kit and adjust with the appropriate chemicals.
Check ozone
May appear on a regular schedule. Change the UV as
instructed by the manufacturer.
spaTouch 3 User Guide
42344_Rev D 28
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa SpaTouch3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa SpaTouch3 in the language / languages: English as an attachment in your email.

The manual is 10.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info