496277
12
Zoom out
Zoom in
Previous page
1/66
Next page
BABY MONITOR ULTIMATE CARE • Instruction Manual
14
B / Receiver
1. Operation from battery pack
The Li polymer battery pack is already installed in the unit.
2. Operation using the AC adapter (supplied)
The parent unit can be operated on AC mains using
the supplied 5V 1A switching power supply. Connect
the output plug of the power supply to USB port (15)
of parent unit. Connect the adapter to the mains. The
power indicator (19) will change from green to red
and the segments within the battery icon as shown on
screen will flash in turn, showing the battery is under fast
charging. Once the battery is fully charged up, the power
indicator (19) turns back to green and the segments
within the battery icon become full and steady. Either
you disconnect the switching power supply or keep
connecting will cause no damage to the battery. In the
latter case, the battery power will not be consumed and
the unit operates from power supplied from the switching
power supply.
NB :
- Before using the parent unit for the first time, charge up the supplied Li-ion battery pack using the
switching power supply for at least 4 hours.
- You can also charge the battery through the USB port with an optional USB cable (not supplied), but
the charging time will be longer.
CONTROLS LAYOUT
Receiver
12. Menu button
13. Up/down buttons
14. Volume control and On/Off switch
15. USB port
16. LED level meter for audio
17. Digital TFT screen
18. Speaker
19. Power/battery level indicator
20. Camera On/Off indicator
21. Camera remote control button
22. Audio channel selector
23. Screen On/Off switch
24. Li battery socket
25. Swivel belt clip
Transmitter
1. Power On/Off switch
2. Microphone sensitivity adjustment
3. Power indicator
4. Transmit indicator
5. Light sensor
6. Camera
7. Night vision LEDs
8. Microphone
9. Audio channel selector
10. Pairing switch
11. DC Jack
VIDEO PAIRING
This process is to match the parent unit with baby unit so that they can communicate with each other while
no other devices (even baby monitor of identical model) can interfere with you or receiving your image.
The baby and parent unit are already paired when you use them for the first time.. However, in case you
still experience interference, it is possible to pair them again by performing following steps:
1. Switch on both baby and parent unit.
2. With the help of a pointed object, momentarily press the pairing switch (10) located at bottom of baby
unit. The power indicator (3) will start to flicker for about 5 sec.
3. While the power indicator (3) is still flickering, press and hold the Menu button (12) of baby unit until the
screen show image as captured by the camera .This represents the pairing process is successful and
the power indicator (19) will blink one time.
4. The units are now ready for video operation.
5. If the pairing is not successful, repeat above steps 1 – 3.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Ultimate Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Ultimate Care in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info