496277
11
Zoom out
Zoom in
Previous page
1/66
Next page
SETTING OF AUDIO CHANNEL
Transmitter
Press down the lock button and slide open the
battery cover.
With help of a pointed object, select one of the
two audio channels using switch (9).
Your transmitter and receiver are already tuned to the same channel: you can use them immediately without
carrying out this step. If you notice any interference, follow the procedure for setting your transmitter and
receiver to another channel.
Make sure the setting is the same in both units.
NB : In case you still encounter interference in actual operation, change to another channel. Make sure
that you always keep the same settings for the transmitter and receiver.
Receiver
Press the latch cover and slide it to gain access
to the battery compartment.
Proceed as for the transmitter to set the channel
(switch 22).
1
PRECAUTIONS
- Use only the supplied AC adapters, use of other adapters may cause damage to the baby monitor
- When not using the monitor for as long period of time, remove all batteries from the transmitter and
receiver to avoid damage due to battery leakage.
- Disconnect the AC adapter from the wall outlet when the monitor is not to be operated.
- The baby monitor is best performed within a temperature range of -9°C to +50°C.
- Do not leave the monitor expose to strong sunlight for a long time or nearby any heat source, moisture
and excessive dusty environment.
- Do not open the cabinet, no serviceable part inside.
- Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw
electrical and electronic equipment away with unsorted household waste, but dispose of it at a selective
collection point.
13
BABY MONITOR ULTIMATE CARE • Instruction Manual
POWER SUPPLY
A / Transmitter
1. Operation using batteries (not supplied)
Press down the lock button and slide open the battery door. Insert
4 pieces AA size (UM-3) alkaline batteries into the compartment.
Observe correct polarities indication (+/-). Install back the battery
cover.
2. Operation using the AC adapter (supplied)
The transmitter can be operated on AC mains using the supplied
6V AC adapter.
Connect the output plug of adapter to DC jack (11) of the transmitter.
Connect the adapter to the mains.
N.B.: The communication range is longest when the transmitter is
operated on AC mains.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Ultimate Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Ultimate Care in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info