Manual Babymoov High Care (page 9 of 34) (English, German, Dutch, French, Italian, Portuguese, Spanish)

496278

Zoom out

Zoom in

1/34

BABYPHONE HIGH CARE • Instruction Manual

B / Receiver

• Place the receiver at a reasonable distance away from the transmitter to avoid feedback. Too close a distance

will create a screeching sound.

• Once the unit receives a signal from the transmitter, the screen will become backlighted and LEDs in the

level meter will light up. The louder the baby’s voice, the more number of LED will be lighted up.

• The speaker volume can be adjusted using the Up/Down button (9). The volume bar graph in the screen

will also change correspondingly. More segment of bar graph shown means higher volume from speaker.

When no segment is shown on the screen, the speaker is totally muted.

• This unit is equipped with a vibrating alert. Set the power ON/OFF switch (8) to position . The vibration

icon will also show up in the LCD. Once the received baby’s voice is loud enough, the vibrator starts

functioning. To save battery power, it is recommended not to use the vibrating alert frequently.

• When the out-of-range alert function is set to On in both transmitter and receiver, once the receiver is beyond

the communication range of the transmitter for over 2 minutes, an out-of-range alarm will be heard. The

LED level meter starts flashing together with the out-of-range icon to alert the parents. Besides, the

temperature reading will show - -°C . The alarm and icon will go off only when the receiver falls back within

the communication range of transmitter.

N.B.: This alarm will also be heard in case the transmitter is switched off, or its battery has run down, or

its power is cut off, or the channel/digital code setting is different between the transmitter and receiver,

or the out-of-range alert setting is different between transmitter and receiver.

• Whenever the baby’s room temperature falls outside the range as preset by the upper and lower

temperature limits, an alarm will b e heard : the correspondingly icon (U ou L) and the current temperature

reading start flashing in the screen.

• To c heck your settings, press briefly on the receiver mode button (10). The various settings will be displayed

according to a cycle:

• The night light (4) can be s et permanently ON by moving the power ON/OFF switch to position . The night

light can also be set to be VOX (voice activated) by momentarily pressing the mode button (3) : the VOX

icon will be shown besides the icon . Under VOX mode, the night light will be switched on once the

microphone 5 detects a sound and automatically goes off a few seconds after the microphone 5 stops

picking up any sound.

• The condition of the battery is shown by the battery status indicator . When the battery power is being

consumed, the segments within the battery status indicator gradually falls. Once the indicator becomes

empty it will start flashing, besides, the transmitter will also send out a signal to the receiver to alert

the parents.

Current baby’s room

temperature

Selected channel

and digital code

Upper temperature limit

Lower temperature limit

Out of range alarm condition

• To ckeck your settings, press briefly on the receiver mode button (3) . The various settings will be displayed

according to a cycle :

Current baby’s room

temperature

Selected channel

and digital code

EOut of range

larm condition

Selected

output power

BABYPHONE HIGH CARE • Instruction Manual

PRECAUTIONS

ACCESSORIES

• Use only the supplied AC adapters, use of other

adapters may cause damage to the baby monitor

• When not using the monitor for as long period of

time, remove all batteries from the transmitter and

receiver to avoid damage due to battery leakage.

• Disconnect the AC adapter from the wall outlet

when the monitor is not to be operated.

• The baby monitor is best performed within a

temperature range of -9°C to +50°C

• Do not leave the monitor expose to strong sunlight

for a long time or nearby any heat source, moisture

and excessive dusty environment.

• Do not open the cabinet, no serviceable part inside.

• Waste Electrical and Electronic Equipment should

be disposed of by selective collection. Do not throw

electrical and electronic equipment away with

unsorted household waste, but dispose of it at a

selective collection point.

a. 6V AC adapter for transmitter

b. 6V AC adapter for rapid charger

c. Rapid charger

d. Transmitter unit

e. Receiver unit

f. Li rechargeable battery pack (installed in

receiver unit)

g. Hand strap

h. User manual

d e

• The condition of the rechargeable battery pack is shown by the battery status indicator . When the battery

power is being consumed, the segments within the battery status indicator gradually falls. O nce t he indicator

becomes empty, its starts flashing and an alarm will be heard. When the receiver is switched on and

placed in the charger, the segments within the battery status indicator will

flash in turn while battery is being charged. Once charging is completed,

the flashing will stop and all three segments show steady up indicating the

battery is full.

• For more convenience, the receiver can be worn around the neck with

a strap (supplied).

C / Transmitter and receiver

Whenever a button is pressed, a beep will sound to confirm that your input

has been recognised by the unit. The sound level of the beep and the alarm

is fixed and independent of the loudspeaker volume setting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov High Care in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Babymoov High Care Manual

Product: