496278

Babymoov High Care Manual

8
Zoom out
Zoom in
Previous page
1/34
Next page
BABYPHONE HIGH CARE • Instruction Manual
14
15
BABYPHONE HIGH CARE • Instruction Manual
Out-of-range alert setting
in Transmitter
Out-of-range alert setting
in Receiver
Remarks
ON
ON
OFF
OFF
ELo
ON
OFF
ON
OFF
ON or OFF
Alarm function normally
No alarm even when out of range
Always give alarm no matter out of range
or not
No alarm even when out of range
Alarm sound once distance apart exceed
20-30m (provid appears on rerceiver LCD)
OPERATION
A / Transmitter
• Place the transmitter about 1 m from the cradle, directing the microphone (5) towards the baby.
• Use the selection button (2) to adjust the microphone sensitivity (volume indicator = bar chart on the s creen).
The more bars you show, the more sensitive the microphone is to sounds.
• As soon as the transmitter detects a sound, the screen lights up and the transmission symbol
is displayed.
REMARKS
1. Channel and digital code choice
If in the unlikely event your next door neighbor also has the same model of baby monitor and program
with the same channel and digital code, then you may need to select a new channel and digital code
or otherwise you will hear e ach other’s baby . Repeat the above steps, besure you also program the receiver
with the same new channel and digital code.
2. Power choice
Note with low power, the communication distance will become shorter but the battery life can be
prolonged. Besides, the level of emitted radiation is also reduced.
3. Distance alert
This distance control function may be useful to watch baby’s activities in his room. The transmitter is
placed on the child and if he moves away more than 25 meters, an alert will be heard from the receiver
to alert parents.
N.B.: if the out of range function is already On on the transmitter, the receiver will automatically activate
the distance alert (as indicated by the letter on the LCD screen), wether the out of range setting is On
or Off.
4. Temperature alarm
• It is recommended to have at least ±5°C between the settings of upper and lower temperature limit
from the current temperature reading, otherwise the temperature alarm can often be heard
whenever the baby’s room temperature changes lightly.
• In case there is a sudden temperature change, the sensor may need to take a few minutes before it
can settle to the new environment and show the correct reading on the screen.
• Caution : because of the heat produced bu the device itself, a margin of error + 5°C may be noticed.
Please add 5°C to the upper and lower temperature to consider this gap.
Maximum
temperature
alarm
Use the selection button (9) to choose the
maximum temperature (between -3 °C
and +49 °C) above which the receiver will
trigger an alarm. If the off setting is selected,
no maximum temperature limit will be
active. Press the mode button (10) to
validate your choice.
Out of range
alert
Otherwise, use selection button (2) to
chose on o r off and press the mode button
(3) to validate your choice. The LCD will
show following:
Use selection b utton (9) to chose the same
setting as on the transmitter and press
the mode button (10) to validate your
choice. The LCD will show following:
U
Minimum
temperature
alert
Use the selection button (9) to choose the
minimum temperature (between -8 °C and
+44 °C) below which the receiver will trigger
an alarm. If your selection is illogical (for
example a maximum temperature lower
than minimum temperature) the receiver
will refuse your choice and will correct it
automatically to a value 2 °C below the
maximum limit. If the off setting is selected,
no minimum temperature limit will be
active. Press the mode button (10) to
validate your choice.
L
Normal screen
Out of range
alert
When ELo is selected, the range check
ico will appear on the LCD and the
receiver will provide an alarm
when the distance between transmitter
and receiver exceeds 25 m.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov High Care at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov High Care in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info