661364
293
Zoom out
Zoom in
Previous page
1/316
Next page
APPENDIX
291
7
The upper thread
breaks.
Sliding surface on hook is not smooth.
There are burns on it.
1 Hook race area
Consult your nearest authorized Baby
Lock retailer.
The thread is loose in the hook area.
Remove the loose thread. If the thread
is tangled in the hook, clean the hook.
p.281
The play between the hook and the
race is too much.
Consult your nearest authorized Baby
Lock retailer.
The hook does not rotate smoothly. Remove lint, clean and apply oil. p.281, 285
The space between the hook stopper
and the hook cannot be adjusted.
Consult your nearest authorized Baby
Lock retailer.
The upper thread is not threaded
correctly.
Pull the upper thread by hand from
below the presser foot, and check that
the thread moves smoothly. If the
thread does not move smoothly, it is
not correctly threaded.
Un-thread the machine and
re-thread the machine.
Make sure the thread is correctly
positioned in the needle bar thread
guide.
p.57-60
Upper thread is not positioned in upper
or middle thread guide.
Make sure thread passes completely
under upper and middle thread guide.
p.57-60
There are knots or tangles in the thread. Remove any knots or tangles.
The upper thread tension is too high. Decrease the upper thread tension. p.125
The lower thread tension is incorrect.
The thread does not roll out of the
bobbin case smoothly.
Adjust the lower thread tension. p.124
The bobbin case is damaged.
Replace the bobbin case with a new
one.
p.33
The bobbin thread is not wound
correctly.
Check that the bobbin is wound so that
it is about 80% full and that the thread
is evenly wound. If the bobbin is not
correctly wound, replace the bobbin
with one that is correctly wound or
rewind the bobbin.
p.33
A bobbin designed specifically for this
machine is not used.
Use the correct bobbin. p.33
The automatic needle-threading
mechanism is broken.
Consult your nearest authorized Baby
Lock retailer.
Adhesive is attached to the needle. Replace the needle. p.86
The fabric is not taut.
Firmly set the fabric in the embroidery
frame so that it is taut.
p.48, 93
The thread quality is poor.
The thread quality is too weak due to
age of thread. Replace thread.
The embroidery data contains stitches
with a pitch of zero.
Delete all stitches with a zero pitch. p.228
The embroidery data contains many
stitches with an extremely small pitch.
Delete all stitches with a small pitch. p.228
The thread density of the embroidery
data is too fine.
Three or more overlapping stitches are
being sewn.
Using a data design system, correct the
thread density and overstitching
settings in the embroidery data.
p.148
Symptom Probable Cause Remedy Reference Page
293


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Valiant - BMV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Valiant - BMV10 in the language / languages: English as an attachment in your email.

The manual is 15,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Valiant - BMV10

Baby Lock Valiant - BMV10 Additional guide - English - 1 pages

Baby Lock Valiant - BMV10 Additional guide - English, French, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info