661364
291
Zoom out
Zoom in
Previous page
1/316
Next page
APPENDIX
289
7
The needle breaks.
The presser foot is set too high and not
correctly positioned.
The needle hits/touches the presser
foot.
Consult your nearest authorized Baby
Lock retailer.
The area around the embroidery foot
hole is damaged.
1 Scratches or Burrs
Replace the presser foot.
Consult your nearest authorized Baby
Lock retailer.
Sliding surface on hook race is not
smooth. There are scratches or burrs on
it.
1 Hook race area
Consult your nearest authorized Baby
Lock retailer.
The bobbin or bobbin case are not
correctly installed.
Remove and reinstall bobbin and
bobbin case.
p.36, 37
The hook is not correctly installed.
Consult your nearest authorized Baby
Lock retailer.
The hook stopper is not correctly
installed, the hook is making a
complete rotation.
Consult your nearest authorized Baby
Lock retailer.
The upper thread is not threaded
correctly.
The upper thread is catching
somewhere.
Pull the upper thread by hand from
below the presser foot, and check that
the thread moves smoothly. If the
thread does not move, it is not threaded
correctly. Thread the upper thread
correctly. Make sure the thread is
caught by the needle bar thread guide.
p.57-60
The upper thread tension is set too
high. It does not run.
Decrease the upper thread tension and
make sure tension disc rotates when
pulling on thread.
p.125
A bobbin designed specifically for this
machine is not used.
Use the correct bobbin. p.33
The needle and the hook are not
correctly passing each other.
Hook timing may be OFF. Consult your
nearest authorized Baby Lock retailer.
There is backlash play (forward/
backward) in the needle bar case.
Consult your nearest authorized Baby
Lock retailer.
The thread density of the embroidery
data is too fine.
Three or more overlapping stitches are
being sewn.
Using a data design system, correct the
thread density and overstitching
settings in the embroidery data.
p.148
The thread is not cut
automatically.
Lint or dust has accumulated around
the needle plate (moving knife, fixed
knife or thread retaining plate).
Remove any lint or dust around the
needle plate.
p.282
A bobbin case designed specifically for
this machine is not used.
Use the correct bobbin case.
Lint or dust has accumulated in the
thread tension disc.
Remove the tension dials, and then
remove any lint or dust accumulated
between the felt washers.
p.284
Symptom Probable Cause Remedy Reference Page
291


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Valiant - BMV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Valiant - BMV10 in the language / languages: English as an attachment in your email.

The manual is 15,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Valiant - BMV10

Baby Lock Valiant - BMV10 Additional guide - English - 1 pages

Baby Lock Valiant - BMV10 Additional guide - English, French, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info