661364
290
Zoom out
Zoom in
Previous page
1/316
Next page
288
Troubleshooting
If the machine does not operate correctly, check for the following points/issues before requesting service.
If the suggested remedy does not correct the problem, contact your authorized Baby Lock retailer.
Symptom Probable Cause Remedy Reference Page
The embroidery
machine does not
operate.
The machine is not turned on. Turn on the embroidery machine. p.38
The machine has not been unlocked. Touch the unlock key. p.64
The start/stop button was not pressed.
With the machine unlocked, press the
start/stop button.
p.64
The embroidery frame
cannot be attached to
the machine.
The embroidery frame holder attached
to the machine is not appropriate for
the selected embroidery frame.
Select the appropriate embroidery
frame holder for the embroidery frame.
p.88
The embroidery frame
cannot be removed or
attached.
Depending on the position where the
machine’s carriage has stopped, it may
be difficult to remove or attach the
embroidery frame.
Touch the “Needle bar/Frame move
key” to position the carriage, so the
embroidery frame can easily be
removed or attached.
p.88
Embroidering is
interrupted while
embroidering a large
project using the flat,
quilt or jumbo frame.
Embroidering is interrupted by the
presser feet not in use catching on the
fabric outside of the design area.
Stitch the design as close to the center
of the embroidery frame using needle
bars 3 through 7, keeping the head of
the machine as centered as possible.
p.110, 132
The needle breaks.
The needle is not installed correctly. Correctly install the needle. p.86
The needle set screw is loose.
Use the Allen screw driver to securely
tighten the needle set screw.
p.86
The needle is bent or blunt. Replace the needle with a new one. p.33, 86
The area around the hole in the needle
plate is damaged.
1 Scratches/Burrs
Replace the needle plate.
Consult your nearest authorized Baby
Lock retailer.
The needle hits/touches the needle
plate.
1 Needle
2 Hole in needle plate
3 Needle hits hole
Replace or consult your nearest
authorized Baby Lock retailer.
p.86
290


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Valiant - BMV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Valiant - BMV10 in the language / languages: English as an attachment in your email.

The manual is 15,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Valiant - BMV10

Baby Lock Valiant - BMV10 Additional guide - English - 1 pages

Baby Lock Valiant - BMV10 Additional guide - English, French, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info