661219

Baby Lock Sashiko 2 - BLQK2 Manual

37
Zoom out
Zoom in
Previous page
1/42
Next page
M
A
I
N
T
E
N
A
N
C
E
36
Cleaning the Shuttle Hook
If lint and bits of thread accumulate in the hook, this will interfere with the smooth operation of
the machine. Check and clean regularly. We recommend using the cleaning brush often in order
to keep lint off the needle bar, the feed dog mechanism and foot.
The major moving parts of your Baby Lock machine are well protected and will only require a
small amount of good quality sewing machine oil as outlined in the steps below.
1. Remove the bobbin case from the shuttle race pin
and push the shuttle race clasps toward the outside
edges of the shuttle race ring. (Fig. A)
2. Remove the shuttle race ring and shuttle hook.
(Fig. B)
3. Using the lint brush thoroughly clean around the
inside of the shuttle driver and especially the
grooved area of driver. (Fig. C)
Place a few drops of a good quality sewing machine
oil on the tip of a cotton swab and gently wipe
around the inside of the shuttle driver being careful
not to catch cotton fibers on the driver. It may be
necessary to turn handwheel counterclockwise in
order to reach all areas. Remove any caught cotton
fibers with tweezers.
NOTE: Frequency of oiling will depend on machine
usage along with the types of fabrics used. Fabrics
producing a large amount of lint will absorb oil quick-
ly. An easy way to remember would be to clean and
oil machine before using.
4. Replace shuttle hook, then the shuttle race ring, and
last push the shuttle race clasps toward the inside of
the shuttle race until they click back into place.
(Fig. D)
A
B
C
Shuttle Race Ring
Shuttle Hook
Shuttle
Race Ring
Shuttle Race
Clasps
D
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Sashiko 2 - BLQK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko 2 - BLQK2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info