661219
36
Zoom out
Zoom in
Previous page
1/42
Next page
M
A
I
N
T
E
N
A
N
C
E
35
Cleaning the Feed Dog
Lint and fuzz can build up between the teeth of the feed dog area and if not kept clean can hinder the
even feed of your fabric. To properly clean the feed dog areas follow directions below:
1. Press the positioning button so machine is in the loading position; by doing so the wiper will be out
of your way to make cleaning easier.
2. Press the main power switch to the OFF (O) position and unplug the power cord from the wall
outlet.
3. If necessary, remove the presser foot for easier access. Raise the presser foot lever and with screw-
driver remove the presser foot holder screw by turning it counterclockwise. (Fig. A)
4. Remove the two screws holding the needle plate by turning them counterclockwise with screwdriv-
er. Lift and remove needle plate. (Fig. B)
5. Clean the feed dog area thoroughly with lint brush. Use your tweezers to remove any threads that
may be caught in the feed dog teeth. (Fig. C)
6. Reposition the needle plate and tighten screws snugly. Be sure the needle enters the center of the
needle plate opening; otherwise the needle may break and cause injury. (Fig. D)
7. If presser foot was removed, reposition presser foot and the presser foot holder screw then with
screwdriver tighten the screw snugly.
C
B
D
Needle
hole
Cleaning the Machine Surface
If the surface of the Sashiko machine gets dirty, lightly soak a cloth in mild detergent, squeeze it out
firmly and then wipe the machine surface. After cleaning it once in this way, wipe the surface again
with a dry soft cloth.
A
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Sashiko 2 - BLQK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko 2 - BLQK2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info