661219
39
Zoom out
Zoom in
Previous page
1/42
Next page
A
P
P
E
N
D
I
X
38
Troubleshooting
Before taking your machine in for service at your Baby Lock retailer, check the following:
The machine fails to
start:
1. Are electrical plugs properly connected?
2. Is foot control plug properly connected?
3. Is the main power switch on?
4. Is the side cover open?
5. Has the presser foot lever been lowered?
6. Is the latch wire in the release position?
7. Check household circuit breaker or fuse.
8. Is the bobbin winder disengaged?
9. Is the specialty stitch mode off?
8
8
8/9
10
7
34
-
17
32
Thread breaks:
1. Is the bobbin case threaded properly?
2. Is the bobbin case loaded properly?
3. Is the needle inserted correctly?
4. Is the needle bent, broken, and/or worn?
5. Thread is knotted, tangled or of poor quality.
6. Are you using the correct thread weight
for machine?
7. Is the needle being used the Organ QKx1system?
8. Is the latch wire bent, broke, and/or worn?
9. Is the latch wire in the center channel of needle?
10. Is the shuttle hook free of lint and bits of thread?
11. Spool cap is not properly attached
and/or the correct size for thread spool.
18
18
33
-
10
10
9
-
34
37
11/17
Skipped stitches:
1. Is the needle bent, broke, and/or worn?
2. Is the latch wire bent, broke, and/or worn?
3. Is the needle inserted correctly?
4. Is the bobbin case threaded properly?
5. Is the bobbin case loaded properly?
6. Is the presser foot pressure dial set correctly for
the type of fabric?
7. ls the presser foot height adjustment dial set cor-
rectly?
8. Is the needle being used the Organ QKx1system?
9. Is the fabric being pushed or pulled while sewing?
10. Is the shuttle hook free of lint and bits of thread?
-
-
33
18
18
11
11
9
-
37
Condition
Cause
See
page(s)
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Sashiko 2 - BLQK2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko 2 - BLQK2 in the language / languages: English as an attachment in your email.

The manual is 5,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info