661214

Baby Lock Ovation - BLES8 Manual

12
Zoom out
Zoom in
Previous page
1/92
Next page
O
V
E
R
V
I
E
W
10
B
Cutting Blade Locking Dial
Cutting Blade Cover and Sewing Table
Upper Looper Positioning Knob
To lock cutting blade down:
Turn the dial clockwise 180 degrees until you see "LOCK" on the
top.
The cutting blade will stay below the needle plate for non-cutting
techniques. (fig. A)
To re-engage cutting blade:
Turn the cutting blade locking dial half of a turn counter-clockwise.
The blade will start moving automatically when you start sewing.
To use the sewing table for chain/cover stitching you will need to
change the cutting blade cover as follows:
a) Open front cover and cutting blade cover. (page 9, fig. G & H)
b) Depress the center snap and gently pull toward you to unsnap
blade cover (fig. D) and then snap sewing table into place. (fig.
E)
c) Disengage the upper looper by turning the upper looper
positioning knob to "Down". (fig. B)
d) Move the stitch width adjusting dial to the 3.0 setting.
e) To close the sewing table door raise to the up position and slide
to the left placing the tab of the table under the needle plate. (fig.
E)
f) Close the front cover.
Note: Even though you are not using your cutting blade with the
sewing table, the adjusting dial needs to be moved to its lowest
setting for the table to fit against the needle plate.
When you change from overlocking to chain/cover stitching, you
should also disengage the upper looper by changing the upper
looper positioning knob to the "DOWN" position before you close the
sewing table door.
a) Turn the handwheel until upper looper is at its lowest position.
b) Change the upper looper positioning knob to the "DOWN"
position. (fig. B)
c) Close the sewing table door and then the front cover. (fig. C)
Note: Make sure the upper looper positioning knob is in the "UP"
position prior to locking the machine to thread the upper looper.
O
8 0 2
5 0 7
5 0 2
7 0 7
,/#+
A
D
E
C
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ovation - BLES8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ovation - BLES8 in the language / languages: English as an attachment in your email.

The manual is 10,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info