661214

Baby Lock Ovation - BLES8 Manual

10
Zoom out
Zoom in
Previous page
1/92
Next page
O
I
Main Switch
I I
OO
O
V
E
R
V
I
E
W
8
Setting Up Your Ovation
1. Remove machine from box
After removing the packing materials from the
box, gently lift your Baby Lock serger by grasping
the handle provided on the top of the machine.
Place the machine on a serger sewing table or
any sturdy level surface that provides ample work
area to the left. Place the foot control in a pedal
stay, if desired, and place it under the sewing
table.
2. Plug in the machine
Before connecting the power supply, make sure
the voltage and frequency shown on the machine
conforms to your electrical power.
With the overlock machine turned off, insert the
foot control jack and the power cord plug into
their appointed connectors. (fig. A) Then plug
the power cord into an electrical wall outlet.
Always make sure the power is off when the
machine is not in use. (fig. A) Available foot
control: Model YC-485EC or 4C-333C.
3. Polarized plug
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of elec-
tric shock, this plug is intended to fit in a polarized
outlet only one way. (fig. B) If the plug does not fit
fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
4. Foot controller
The sewing speed of the machine is determined
by the amount of pressure applied to the foot
controller. When not in use, do not place anything
on the foot controller, or the machine could start
inadvertently and the controller or motor could
burn out.
Lay the foot control cord along the inside of the
channel located on the bottom right side of the
overlock machine. (fig. C)
5. Extension thread stand
To insert the extension thread stand:
Place the pegs into the slots on the back of the
main thread stand.
Push the extension thread stand into the main
thread stand until it snaps into place. (fig. D)
To remove:
Using both hands squeeze together the upper
section of the stand support braces that are
located just underneath the stand while gently
raising it up and out to release from the main
thread stand.
A
E
D
B
C
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ovation - BLES8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ovation - BLES8 in the language / languages: English as an attachment in your email.

The manual is 10,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info