Manual Baby Lock Embellisher - EMB12 (page 11 of 16) (English)

661191

Zoom out

Zoom in

1/16

5. Yarn Embellishing cont.

Yarn threader

5. Rotate the handwheel to bring the needle

bar to its highest position.

6. Raise the cloth presser lifter lever.

7. Insert yarn into the yarn port using the yarn

threader. (Fig. 4)

8. Pull the yarn from the bottom of the cloth

presser. (Fig. 5)

9. Place fabric under the cloth presser.

10.

While embellishing with yarn, fabric may

be moved in all four directions. (Fig. 6)

11. Lower the cloth presser lifter lever.

ATTENTION: Since there is such a wide vari-

ety of yarns to select from use care when

using dense, fuzzy, or thick yarns. It is recom-

mended to test sew a sample using all yarns

before sewing on your project.

Turn hand-

wheel several t

imes to insure there is no

resistance with needle penetration.

Yarn rec-

ommended for use in this machine should not

exceed 4mm (5/32 inches) in diameter. Yarn

needs to be able to slide freely within the yarn

port.

NOTE: If needle bar is not rotated to the high-

est position, the yarn will not go down through

the inside of the needle bar.

At the beginning of the yarn

embellishing, slightly pull the

end of the yarn.

Fig. 4

Fig. 5

Fig. 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Embellisher - EMB12 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Embellisher - EMB12 Manual

Product: