Manual Baby Lock Embellisher - EMB12 (page 9 of 16) (English)

661191

Zoom out

Zoom in

1/16

4. Start Embellishing cont.

Layer the cloth/fabric/materials that will be felted

together to create the embellishment. Make sure

the smaller piece to be felted is on the correct side

of the project.

NOTE:Depending on the look you want to achieve

this can be either right or wrong side of project.

Place the layers to be felted together under the

cloth presser. Lower the cloth presser lif

ter lever.

If needed, adjust the height of the cloth presser at

this time so the project can move freely under the

cloth presser.

Move the cloth/fabric/materials in any direction so

that the needles can mesh the layers together.

ATTENTION: Always check to make sure the fab-

ric under cloth presser will move freely or does not

flap before embellishing. If necessary

, adjust the

cloth presser height adjusting screw.

When you have finished embellishing, turn the

handwheel toward you making sure the needles

are completely out of the project. Never remove

the embellished project with the needles in the

project, as the needles can bend or break.

NOTE: Always make sure the cloth presser lifter

lever is lowered before starting to embellish. If the

cloth presser lifter lever is not lowered, the

materials can easily be lifted by the needles and

can cause needle breakage.

Remove the sewing table by sliding it to the left

and the machine will convert to a free arm. This

will allow you to embellish sleeves, pant legs, and

small areas.

This will also give you access to the free arm door

to clean out the lint that has accumulated from

embellishing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Embellisher - EMB12 in the language / languages: English as an attachment in your email.

The manual is 1,91 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Embellisher - EMB12 Manual

Product: