661179
197
Zoom out
Zoom in
Previous page
1/204
Next page
Troubleshooting
Appendix A-19
MAINTENANCE AND TROUBLESHOOTING
A
Error messages
When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is
displayed. If you press or do the operation correctly while the error message is displayed, the message disappears.
Embroidery pattern
does not sew out
correctly.
Fabric is hanging off the table. If the fabric is hanging off the table during
embroidery, the embroidery unit will not move
freely. Place the fabric so that it does not hang
off the table or hold the fabric to keep it from
dragging.
B-57
Fabric is snagged or caught on something. Stop the machine and place the fabric so that it
does not get caught or snagged.
Embroidery frame was removed during sewing
(for example, to reset the bobbin). The presser
foot was bumped or moved while removing or
attaching the embroidery frame, or the
embroidery unit was moved.
If the presser foot is bumped or the embroidery
unit is moved during sewing, the pattern will not
turn out. Be careful when removing or
reattaching the embroidery frame during
sewing.
B-62
Stabilizer is incorrectly attached, for example, it
is smaller than the embroidery frame.
Attach the stabilizer correctly. B-58
Loops appear on
the surface of the
fabric when
embroidering.
The thread tension is incorrectly set. Adjust the thread tension. E-26
The combination of the bobbin case and bobbin
thread is incorrect.
Change the bobbin case or bobbin thread so
that the correct combination is used.
B-57
Error messages Cause/solution
1
A malfunction occurred. Turn the machine off, then
on again.
This message is displayed if some malfunction occurs.
Turn the machine off, then back on again.
If this message continues to appear, the machine may be malfunctioning.
Please contact your authorized Baby Lock retailer.
2
Cannot change the configuration of the characters. This message is displayed when there are too many characters and the
curved character configuration is impossible.
3
Cannot change the font since some letters are not
included to the selected font.
This message appears when the font of the embroidery character pattern is
changed to one that does not include characters used in the pattern.
4
Cannot recognize the data for the selected pattern.
The data may be corrupted. Please turn off the
power and turn on again.
This message appears when you try to retrieve pattern data that is invalid.
Since any of the following may be the cause, check the pattern data.
The pattern data is damaged.
The data that you tried to retrieve was created using another
manufacturer’s data design system.
Turn the machine off, then on again to return it to its normal condition.
5
Check and rethread the upper thread. This message is displayed when the upper thread is broken or not threaded
correctly, and the “Start/Stop” button, etc. is pressed.
6
Data volume is too large for this pattern. This message is displayed when the patterns you are editing take up too
much memory, or if you are editing too many patterns for the memory.
7
Lower the buttonhole lever. This message is displayed when the buttonhole lever is up, a buttonhole
stitch is selected, and the “Start/Stop” button, etc. is pressed.
8
Lower the presser foot lever. This message is displayed when a button, such as the “Start/Stop” button,
was pressed while the presser foot was raised.
9
No more patterns can be added to this
combination.
This message is displayed when you tried to combine more than 70
decorative stitches.
10
Not enough available memory to save. This message is displayed when the memory is full and the stitch or pattern
cannot be saved.
11
Not enough available memory to save the pattern.
Delete another pattern?
This message is displayed when the memory is full and the stitch or pattern
cannot be saved.
Symptom Probable Cause Remedy Reference
197


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Accord BLMCC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Accord BLMCC in the language / languages: English as an attachment in your email.

The manual is 6,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Accord BLMCC

Baby Lock Accord BLMCC Additional guide - English - 44 pages

Baby Lock Accord BLMCC Quick start guide - English - 24 pages

Baby Lock Accord BLMCC Additional guide - French - 44 pages

Baby Lock Accord BLMCC Quick start guide - French - 24 pages

Baby Lock Accord BLMCC Additional guide - Spanish - 44 pages

Baby Lock Accord BLMCC Quick start guide - Spanish - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info