615957
39
Zoom out
Zoom in
Previous page
1/53
Next page
39
AXIS 214 PTZ
Connections
I/O inputs and outputs
The 4-pin I/O terminal connector provides the interface to:
1 transistor output
1 digital input
auxiliary power and ground
The I/O terminal connector is used in applications for e.g.
motion detection, event triggering, time lapse
recording, alarm notification via email, image storage to FTP locations, etc.
Inpu
t - for connecting e.g. a push button. If the push button is pressed, the state changes and the
input becomes active (shown under Event Configuration > Port Status).
Output
- connects e.g. an alarm device that can be activated by Output buttons on the Live View
page, or by an Event Type. The output will show as active (Event Configuration > Port Status) if
the alarm device is activated.
Schematic connection diagram
Connecting audio equipment
1. Connect a microphone (not supplied) to the LINE/MIC IN socket.
2. Connect a loudspeaker (not supplied) to the LINE OUT socket (amplified speakers only).
Function Pin no. Description Pinouts
Transistor Output Pin 4 With a maximum load of 100mA and a maximum
voltage of 24V DC, this out-
put has an open-collector NPN transistor with the emitter connected to the
GND pin. If
used with an external relay, a diode must be connected in parallel
with the load, for protection against voltage transients.
The I/O terminal pins on the
cameras are numbered left
to
right, as shown here.
Digital Input Pin 3 Connect to GND to activate, or leave float
ing (or unconnected) to deactivate.
GND Pin 2 Ground
Auxiliary DC Power
Inpu
t
(12VDC min 12W)
Pin 1 Connected electrically in parallel with the power adapter, this pin provides an
auxiliary connector for mains power to the unit. It can also be used to power
auxiliary equipment, max 50mA.
4
1
2
3
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 214 PTZ - Network Camera at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 214 PTZ - Network Camera in the language / languages: English as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info