810575
37
Zoom out
Zoom in
Previous page
1/66
Next page
Operating manual Heidi Back EN 10 | Air+ installation and operation
37
10.7 Mounting the cover
Fig.36: Mounting the cover
1) Then mount the cover
10.8 How the “AIR+” automatic combustion control works
General
The “AIR+” combustion control only reacts to differences in the firebox temperature. The appropriate
information is transmitted from the firebox temperature sensor to the controls. Should the firebox tem-
perature sensor be defective, unplugged or have a fault, the control unit automatically goes into fault
mode with pre-programmed control opening and does not change this position until the fault is re-
solved.
Operation
Operation of the “AIR+” combustion control consists of the following phases:
Fig.37: Phase
Calibration
Calibration of the controls is carried out when the controls are connected to the mains. In doing so, the
damper door is completely opened 1x and closed again. If the stove has previously been manually
controlled in unpowered operation, then the damper door position is recalibrated when connected to
the mains. Should a rise in temperature be detected during calibration, then the stove immediately
switches to ignition phase 1.
After each combustion cycle the control system carries out a new calibration. This serves to ensure the
correct synchronization between the damper door and the rotary control unit.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Heidi Back 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Heidi Back 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Heidi Back 2.0

Austroflamm Heidi Back 2.0 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info