810575
35
Zoom out
Zoom in
Previous page
1/66
Next page
Operating manual Heidi Back EN 10 | Air+ installation and operation
35
10.3 Converting the rotary control unit
NOTICE
Before dismounting, mark the position of the wooden
handle as shown in the illustration.
1) Dismount the rotary control unit, as shown in the pic-
ture below.
2) Remove the shim.
3) Then reassemble the rotary control unit.
NOTICE
The grub screw must be removed in order to be able to
dismount the rotary control unit. Afterwards the grub screw
must be reinstalled.
Fig.34: Rotary control unit conversion
10.4 Installing the control unit
1) Insert the 125 mm hexagon rod supplied into the air
box and turn fully counterclockwise.
Fig.35: Control unit
2) Then slide the magnetic driving plate onto the hex
rod.
3) Now slide the preassembled unit (motor incl. controls)
on to the hex rod and fix the unit on to the air box us-
ing the two Torx screws shown, which must be re-
moved beforehand.
4) Then mount both the universal cardan joints included
in the set and the rotary control unit.
ðEnsure that the rotary control unit is in the position
shown above before mounting.
5) Then fix the screws on the cardan joints with the rod
system!
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Heidi Back 2.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Heidi Back 2.0 in the language / languages: English as an attachment in your email.

The manual is 7.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Heidi Back 2.0

Austroflamm Heidi Back 2.0 User Manual - German - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info