Manual Austria Email EKL serie (page 28 of 30) (English, German)

800553

Zoom out

Zoom in

1/30

EKL

WARRANTY, GUARANTEE AND PRODUCT LIABILITY

Warranty is made according to the legal provisions of the Republic of Austria and the EU.

1. The prerequisite for honoring of warranty terms on the part of the manufacturer (hereinafter referred to as Manufacturer) is

presentation of a paid invoice for the purchase of the appliance in question, whereby the identity of the appliance including

model and fabrication number must be indicated on the invoice and presented by the claim applicant. The General Terms

and Conditions, Terms and Conditions of Sale and Delivery of the manufacturer shall apply exclusively.

2. The assembly, installation, wiring and startup of the appliance in question must, to the extent that this is prescribed legally

or in the installation and operation guide, have been performed by an authorized electrical technician or installer who has

followed all the required regulations. The hot water tank (excluding outer jacket or plastic cover) must be protected from

exposure to direct sunlight to prevent discoloration of the polyurethane foam and possible cracking of plastic parts.

3. The area in which the appliance is operated must be kept from freezing. The unit must be installed in a location where it can

be easily accessed for maintenance, repair and possible replacement. The costs for any necessary changes to the structural

conditions (e.g. doors and passages too narrow) are not governed by the guarantee and warranty declaration and therefore

shall be rejected on the side of manufacturer. When erecting, installing and operating the water heater in unusual locations

(e.g. attics, interior rooms with water-sensitive oors, closets, etc.), provision must be made for possible water leakage and

means provided for catching the water with a corresponding drain to avoid secondary damage in the context of product

liability.

4. Warranty claims will not be honored for:

inappropriate transport, normal wear and tear, intentional or negligent damage, use of force of any kind or description,

mechanical damage or damage caused by frost or also by exceeding the operating pressure stated on the rating plate, even

if only once, use of connection ttings that do not comply with the standard, use of defective tank connection ttings and

unsuitable and defective service ttings. Breaking of glass and plastic components, possible colour dierences, damage

due to improper use, in particular non-observance of the mounting and operating instructions (Operating and Mounting

Instructions), damage by external inuence, connecting to incorrect voltage, corrosion damage as a consequence of ag-

gressive waters (water not suitable for drinking) in accordance with the national regulations (e.g. Austrian ordinance on

drinking water, TWV – Fed. Law Gazette II No. 304/2001), deviations between the actual drinking water temperature at the

tank tting and the specied hot water temperature of up to 10K (hysteresis of the controller and possible cooling due to

pipelines), Continued use, despite the occurrence of a defect, unauthorised modications to the device, installation of addi-

tional components that were not tested together with the device, improperly carried out repairs, Insucient water conduc-

tivity (min. 150 µs/cm) operational wear of the magnesium anode (wearing part), natural formation of boiler scale, lack of

water, re, ood, lightning, overvoltage, power failure or other types of force majeure. Use of non-original and company-ex-

ternal components such as e.g. heating elements, reactive anode, thermostat, thermometer, ribbed tube heat exchanger,

etc., Parts installed in an uninsulated condition with respect to the storage tank, ingress of foreign particles or electrochemi-

cal inuences (e.g. mixed installations), failure to observe the design documents, unpunctual and undocumented renewal

of the installed protective anode, no or improper cleaning and operation, as well as any deviations from the standard that

reduce the value or functionality of the device only slightly. Fundamental compliance with all regulations in ÖNORM B 2531,

DIN 1988 (EN 806), DIN 1717, VDI 2035 or the corresponding national regulations and laws must be ensured.

5. A justied claim must be reported to the closest customer service location of the manufacturer. The latter reserves the right

to replace or repair a defective part or to decide whether a defective appliance shall be replaced with a working one of

equal value. The manufacturer furthermore expressly reserves the right to require that the purchaser return the appliance

in question. The time of a repair or a replacement is determined by the production.

6. Repairs made under warranty are to be performed only by persons authorized by the manufacturer. Replaced parts become

the property of the manufacturer. If any repairs to the water heater become necessary as part of necessary service work,

these are charged at the cost of repair and prorated material cost.

7. Any work performed without our express order, even this is done by an authorized installer, will void the warranty. Assump-

tion of the costs for repairs performed by third parties presumes that the manufacturer was requested to eliminate the

defect and did not or did not in timely fashion meet his obligation for replacement or repair.

8. The warranty period will not be renewed or extended as a result of a guarantee and warranty claim, service or maintenance

work.

9. Transport damage will only be inspected and if appropriate recognized if it has been reported in writing to the manufactu-

rer no later than the weekday following delivery.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email EKL serie in the language / languages: English, German as an attachment in your email.

The manual is 1.27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Austria Email EKL serie Manual

Product: