800553

Austria Email EKL serie Manual

26
Zoom out
Zoom in
Previous page
1/30
Next page
EKL
26
Type
Tubular heating
element Reconnectable heating output in kW
kW ~230V 3N~400V 3N~400V
r3 r1 r2 16 hrs. 8 hrs. 6 hrs.
4
hrs.
3 1/3
hrs. 4 hrs.
3 1/3
hrs. 3 1/3 hrs.
EKL 080 0,85 0,30 0,85 0,85 1,15 1,70 2,00 2,00
EKL 100 1,10 0,65 1,10 1,10 1,75 2,20 2,85 2,80 2,85
EKL 120 1,35 0,65 1,35 1,35 2,00 2,70 3,35 3,20 3,35
EKL 150 1,65 0,65 1,65 1,65 2,30 3,30 3,70 3,95
FIRST COMMISSIONING
The tank must be lled with water before switching on the electricity.
The expansion water created in the internal boiler during the heating process must drip from the safety valve.
Caution: The rst heating process must be implemented and monitored by a licensed expert.
The hot water drain pipe as well as parts of the safety tting may become hot.
The preset temperature and the actual temperature of the water withdrawn should correspond approxi-
mately after completed heating.
DECOMMISSIONING, EMPTYING
If a water heater is taken out of operation or unused for a longer period of time, it must be emptied and
disconnected all-pole from the electric power grid. Turn o the lead switch or the automatic cutout.
In rooms with a permanent risk of frost, the water heater must be emptied before the start of the cold sea-
son, insofar as the device remains out of operation for several days and is not operated in the anti-frost
position.
The service water is emptied through the drain valve of the safety valve combination after closing the
shuto valve in the cold water supply line and under simultaneous opening of all hot water valves of the
connected service ttings. Emptying may also be performed through the safety valve into the expansion
water funnel (drop collector). For this purpose, the small safety valve wheel is turned to the »Test« position.
Caution: hot water may exit during emptying.
In the case of a risk of frost, it must be observed also that not only the water in the water heater and in the
hot water lines can freeze, but also in all cold water supply lines to the service ttings and to the device
itself. Therefore, it is advisable to empty all ttings and lines holding water back to the frost-safe part of
the domestic water system (domestic water supply).
If the storage tank is put back into operation, then it must bindingly be observed that it is lled with water
and water exits bubble-free at the hot water valves.
INSPECTION, MAINTENANCE, SERVICE
a) During heating, the expansion water must drip visibly from the drain of the safety valve. The expansion water
quantity is approx. 3.5% of the tank’s rated volume when fully heated (approx. 80 °C).
The function of the safety valve must be checked regularly. The water must ow freely from the safety valve
unit into the drain funnel when the safety valve test knob is lifted or turned to the “Test” position.
Caution: the cold water supply and parts of the storage tank connector ttings may become hot thereby.
If the water heater is not heated up or hot water is withdrawn, no water must drip from the safety valve. If this
is the case, then either the water line pressure is too high (install pressure reducing valve over 5.5 bar) or the
safety valve defect. Please call a plumbing expert immediately!
b) The boiler scale as well as the furring forming in the internal boiler of the tank must be removed by an expert
after one to two years of operation in the case of heavily calciferous water.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email EKL serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email EKL serie in the language / languages: English, German as an attachment in your email.

The manual is 1.27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info