800546
32
Zoom out
Zoom in
Previous page
1/36
Next page
Id.Nr.: 123158-19
32
Wiring diagram
INITIAL COMMISSIONING
The tank must be lled with water before switching on the electrical power.
The expansion water created in the internal boiler during the heating process must drip from the safety valve.
Warning: The very rst heating process must be performed and monitored by an expert with a special
concession. The hot water outlet pipe and parts of the safety tting may become hot.
After heating, the set temperature and the temperature of the water drawn o should be approximately
the same.
TAKING OUT OF OPERATION, DRAINING
If a hot water heater is taken out of operation or not used for a longer period of time then it should be
drained and completely disconnected from the electrical power supply grid. Switch o the supply switch
or automatic circuit breaker.
In rooms with a permanent risk of frost, the hot water heater must be drained before the beginning of the
cold season if the device is taken out of operation for several days and is not operated in the frost pro-
tection setting.
After closing the shut-o valve in the cold water supply pipe the domestic water is drained via the drain
valve on the safety valve combination mixer and simultaneous opening of all hot water valves on the
connected outlet taps. Drainage is also possible via the safety valve in the expansion water funnel (drip
catcher). To do this, the safety valve wheel is turned to the Test“ position.
Caution: Hot water may escape when draining.
Further connectivity options
Heating time 3 1/3h
Heating time 4h
Heating time 8h
Heating time 16h
Heating time 3 1/3h
resp. 4h
Heating time 3 1/3h
Switching installed at the factory
6 hours heating time
Please note the installation instructions
r1 heating
r2 heating
r3 heating
f1 temperature control/
safety thermal cutout
h1 beacon ~230V
~230V
Reconnectable heating outputs in kW
(switching installed at factory 6 hours heating time)
Tubular heating element kW
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email EKF series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email EKF series in the language / languages: English, German as an attachment in your email.

The manual is 0.7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info