800527
19
Zoom out
Zoom in
Previous page
1/28
Next page
19
Temperaturbegrenzung
Der Durchlauferhitzer DEX ist mit einer
zuschaltbaren Temperaturbegrenzung aus-
gestattet. Werkseitig ist dieser Ver brüh-
ungs schutz deaktiviert.
• Einschalten: Grenztemperatur vor-
wählen, dann gleichzeitig und
für min des tens 3 Sekunden gedrückt
halten. Das Display bestätigt die
Aktivierung kurz mit »HI«.
• Ausschalten: gleichzeitig Programm-
taste und für mindestens
3 Sekunden drücken. Das Display
bestätigt die Deaktivierung kurz mit
»--«.
Hinweis: Durch die Aktivierung der
Temperaturbegrenzung werden auch
die Programmtasten begrenzt. Daher
müs sen nach einer Deaktivierung der
Tempe raturbegrenzung die Festwerte
der Pro grammtasten gegebenenfalls
neu gespeichert werden.
Werkseinstellungen
wiederherstellen
Sie können alle Einstellungen auf den
Auslieferungszustand zurücksetzen:
• Halten Sie und gleichzeitig
gedrückt, im Display wird nun im
Sekundentakt von »10« bis »00«
rückwärts gezählt. Bei »00« erfolgt der
Reset, früheres Loslassen bricht den
Vorgang ab.
Temperature limitation
The instantaneous water heater DEX is
equipped with an optional temperature
limiting function. This scalding protection
is deactivated in the factory setting.
• Switch on: Select the limit tempe ra ture,
then press and simul taneously
for at least 3 sec. The dis play briefly
confirms the activation by “HI“.
• Switch off: press program key
and simultaneously for at least
3 sec. The display briefly confirms the
deactivation by “--“.
Note: By activation of the tempera-
ture limit also the programme keys
are limited. Therefore, the fixed valu-
es of the programme keys may be set
again after deactivation of the tem-
perature limitation.
Reset to factory setting
All factory settings can be recalled:
• Press und simultaneously. The
display now counts backwards from
“10“ to “00“ in second intervals. The
appliance is reset at value “00“ - if you
stop pressing the keys earlier, you will
cancel the process.
12. Gebrauch 12. How to use
Verbrühungsschutz ein Scalding protection on
+
Drücken Press
≥ 3 sek
1 2
+
Zurücksetzen der Einstellungen Reset
1
Drücken + halten!
Press + hold!
Zurücksetzen
abgeschlossen
Reset completed
3
2
+
Drücken Press
≥ 3 sek
1
Bestätigung der
Deaktivierung
Confirmation
of deactivation
2
Verbrühungsschutz aus Scalding protection off
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email DEX24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email DEX24 in the language / languages: English, German as an attachment in your email.

The manual is 2.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info