800527
18
Zoom out
Zoom in
Previous page
1/28
Next page
DEX 18 / 21 / 24 / 27 KW
18
Sobald Sie den Warmwasserhahn an
der Armatur öffnen, schaltet sich der
Durchlauf erhitzer automatisch ein.
Beim Schließen der Armatur schaltet
sich das Gerät automatisch wieder
aus.
Temperatur einstellen
• Mit den Pfeiltasten und können
Sie die Wunsch temperatur schrittweise
niedriger oder höher einstellen. Wenn
Sie einmal kurz auf eine Taste drücken,
ändert sich die Temperatur um 1°.
Wenn Sie eine Taste länger gedrückt
halten, ändert sich die Temperatur
kontinuierlich. Sie können die Auslauf-
temperatur von 20 °C bis 60 °C wäh-
len.
Hinweis: Wird mit der Pfeiltaste
die Temperatur unter 20 °C ein ge stellt,
zeigt die Anzeige »--« und das Gerät
schaltet die Heizfunktion ab.
Programmtasten
Die beiden Programmtasten ermögli-
chen Ihnen, schnell die voreingestellte
Tempe ratur zu wählen. Wenn Sie auf
eine Programmtaste drücken, wird die
voreingestellte Temperatur gewählt und
angezeigt. Die Werkseinstellung beträgt
für Programm 35 °C und für Programm
48 °C. Sie können die Programmtasten
mit eigenen Einstellungen belegen:
• Durch längeres Drücken der Programm-
taste wird die vorher gewählte
Temperatur gespeichert. Die Anzeige
wechselt von »P1« bzw. »P2« auf
den neu gespeicherten Tempe ratur-
wert. Die neu eingestellte Tempe ratur
steht Ihnen nun jedesmal zur Ver-
fügung, wenn Sie die entspre chende
Programmtaste drücken.
As soon as you open the hot water
tap, the instantaneous water heater
switches on auto matically. When the
tap is closed, the appliance automati-
cally switches off.
Temperature setting
• You can set the required temperature
gradually to a lower or higher value
with the arrow keys and . The
temperature changes by 1 °C if key is
pressed shortly one time. Pressing a
key for a longer time changes the tem-
perature continuously. You can select
the outlet temperature from 20 °C to
60 °C.
Note: If temperature is set below
20 °C with arrow key the display
shows “--“ and the appliance switches
off the heating function.
Programme buttons
The two programme buttons allow to
quickly select the preset temperature.
When pressing a programme key, the pre-
set temperature is selected and displayed.
The factory setting for programme
is 35 °C and for programme it is 48 °C.
You can assign your own settings for the
programme keys:
• Prolonged pressing of the programme
key stores the previously selected
temperature. The display changes from
”P1” or “P2“ to the newly stored
temperature value. This newly set
temperature is now available to you
each time you press the corresponding
program key.
12. Gebrauch 12. How to use
Temperatur einstellen Set temperature
1
–1 °C +1 °C
Speicherwert wählen Select preset temperature
A1 A2
B1 B2
Temperatur speichern Store temperature
2
Drücken Press
≥ 3 sek
Anzeige des neuen Wertes (z.B. 43 °C)
Display of new value (e.g. 43 °C)
Einstellen des
gewünschten
Wertes (z.B.
43 °C)
Set required
temperature
(e.g. 43 °C)
4 3
1
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austria Email DEX24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email DEX24 in the language / languages: English, German as an attachment in your email.

The manual is 2.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info