Manual Auriol Z31092 - IAN 94604 (page 9 of 69) (English, German, Dutch, Danish, French, Swedish, Finnish)

563992

9

Zoom out

Zoom in

Previous page

1/69

Next page

9 GB/IE

If you cannot ﬁnd your country in the table,

please orient yourself to the local time zone.

Using the 12 / 24 hour display

Press the / 12 / 24 button

14

to switch

between the 12 and 24 hour time formats.

Note: The AM symbol in the time display

17

stands for before noon in the 12 hour format.

The PM symbol in the time display

17

stands

for after noon in the 12 hour format.

Setting the alarm time

Note: You can set two diﬀerent alarms separately.

Press the MODE button

15

to select either

Alarm 1

13

or Alarm 2

13

. The

currently set alarm time and the selected

alarm symbol

13

,

13

appear in

the time display

17

.

Press and hold down the MODE button

15

for about 3 seconds. The hour value

ﬂashes. Press the

/ button

11

or the

/ 12 / 24 button

14

to set it to the desired

value.

Tip: By keeping the

/ button

11

or the

/ 12 / 24 button

14

pressed, you acceler-

ate the process and reach the desired value

more quickly. This quicker method can also

be used for making the other settings. If dur-

ing a period of 30 seconds no buttons are

pressed, the LC display returns automatically

to the default display.

Press the MODE button

15

. The minute value

ﬂashes. Press the

/ button

11

or the

/ 12 / 24 button

14

to set it to the desired

value.

Conﬁrm your settings by pressing the MODE

button

15

.

Activating / deactivating the

alarm function

Press the MODE button

15

to access the

activate or deactivate the alarm mode.

Press the ALARM button

10

to activate the

alarm function. The Alarm symbol

13

appears

in the LC display.

Press the ALARM button

10

again to deacti-

vate the alarm function. The Alarm symbol

13

disappears from the LC display.

The alarm will sound when it reach to the set

time. Press the MODE button

15

, the /

button

11

, the / 12 / 24 button

14

or the

SNOOZE / LIGHT button

12

to switch oﬀ

the alarm signal. Otherwise the alarm signal

sounds for about 2 minutes then stops auto-

matically.

Press the SNOOZE / LIGHT button

12

, to

switch oﬀ the alarm. The alarm automatically

switches back on after 5 minutes.

When you press the / button

11

or the

/ 12 / 24 button

14

, the alarm switches

oﬀ and only switches on again on the next

day in the previously set time.

Displaying the sun and moon

rising / setting times

Note: The calculated times of setting and rising

of the sun and moon are intended for orientation

only. You should contact your local weather fore-

casting service for the exact times.

Note: After you have completed all the settings

(see”setting the date / language / clock / time

zone), the weather station calculates the rising and

setting times of the sun and moon. The setting /

rising time of the sun or moon ﬂashes during this

operation.

Press the SUN / MOON button

31

to display

the calculated sunshine hours of the selected

day.

To check the setting / rising time for other

location & date, press and hold down the

SUN / MOON button

31

for about 3 sec-

onds to access the setting / rising time of the

sun or moon quick control mode. The loca-

tion

8

ﬂashes.

Set the country, city, year, month and the

day for which you wish the information to be

displayed by pressing the SUN / MOON

button

31

or the / button

11

or the

/ 12 / 24 button

14

.

Press the SUN / MOON button

31

to con-

ﬁrm your settings.

Note: The sun and moon setting or rising

time ﬂashes while the values are being

calculated.

Note: If the next moon rising or setting is

on the following day, the display shows

MOONRISE+1 or MOONSET+1.

Moon phases

The following moon phases are shown by the

moon phase symbol

6

:

New moon Waxing half-

moon

Half-moon Waxing full

moon

Full moon Waning full

moon

Half-moon Waning half-

moon

Preparing to use the weather

forecasting function

Note: Please take the weather forecast from

your local weather forecasting service into account

as well as the forecast from your weather station.

If there are discrepancies between the information

94604_aur_Funk-Wetterstation_content_GB_FI_DK.indd 9 28.08.13 13:16

1

Hi,
My Auriol 433 MHz remote sensor has stopped working.
My main unit is working perfectly.
I confirmed that it was the sensor by borrowing another from a friend and his works OK with my main unit. (Obviously I have checked that my remote batteries are OK.)
Can I buy a new or second hand remote sensor anywhere.
George Walker, Bromley, UK Submitted on 24-7-2018 at 11:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Auriol Z31092 - IAN 94604 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auriol Z31092 - IAN 94604 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info