Manual Auriol Z31092 - IAN 94604 (page 7 of 69) (English, German, Dutch, Danish, French, Swedish, Finnish)

563992

7

Zoom out

Zoom in

Previous page

1/69

Next page

7 GB/IE

Note: Do not change the location of the

weather station during reception. Otherwise

there may be interference.

For wall mounting:

Hang the weather station with the mount

32

on one screw.

For free standing:

Turn the stand

35

out from the bottom of the

weather station.

Connecting the weather station with the

outdoor sensor:

After removal of the battery safety strip the weather

station attempts to establish a connection with

the outdoor sensor. This process may take a few

minutes. When the connection with the outdoor

sensor has been successfully established, the

selected channel symbol

22

is shown the channel

of the outdoor sensor (To change the channel of

the sensor, see “Setting the channel”). If the con-

nection with the outdoor sensor is not established

automatically, this can be done manually by

pressing TX button

42

of the sensor”.

Radio Signal (DCF):

The DCF signal (time signal transmitter) consists

of time pulses emitted by one of the most accurate

clocks in the world close to Frankfurt / Main,

Germany – this varies by 1 second in a million

years.

Your weather station receives these signals under

ideal conditions up to a distance of approximately

1,500 km around Frankfurt / Main. Reception of

the radio signal usually takes about 3–10 minutes.

Operation

DCF radio signal reception

After the establishment of a connection with the

outdoor sensor the weather station automatically

begins to search for the DCF radio signal. The

search is shown in the LC display by the radio

tower symbol

18

ﬂashing.

When the DCF radio signal is being successfully

received, the radio tower symbol

18

is shown

permanently in the display. If at the time of putting

the device into operation it is not possible to syn-

chronise with the atomic clock, you can also carry

out the clock adjustments manually (see “Setting the

Date / Language / Time / Time Zone Manually”).

Note: During the search for the signal, all func-

tion buttons except for the SNOOZE / LIGHT

button

12

are blocked on the weather station.

In order to correct any deviations from the exact

time, the clock is automatically synchronised with

the DCF radio signal every day at 01:00, 02:00

and 03:00. If the synchronisation with the DCF

signal does not succeed, the radio tower signal

goes out

18

. In this case, the weather station

attempts to conduct a synchronisation with the

DCF radio tower at 04:00 and 05:00.

Reception of the DCF radio signal can also be

started manually on the weather station.

Press and hold down the / button

11

for 3 seconds. The weather station attempts

to receive the DCF radio signal. This process

takes several minutes and is indicated in the LC

display by a ﬂashing radio tower symbol

18

.

If the connection with the DCF radio signal cannot

be established, the search is stopped. A further

attempt to establish a connection is made auto-

matically on the next full hour.

Setting the date / language /

location / clock / time zone

manually

At the location site of the weather station, recep-

tion of the DCF radio signal may be impaired or

interrupted. In this case it is possible to adjust the

device manually.

Follow these steps:

1. Press and hold down the MODE button

15

for about 3 seconds. The time zone display

ﬂashes. Press the

/ button

11

and the

/ 12 / 24 button

14

to set the desired value.

Note: The standard setting for the time

zone is GMT+1. Set the weather station to

correspond to your time zone. Conﬁrm your

setting by pressing the MODE button

15

.

2. The hour value of the time display

17

ﬂashes.

Press the

/ button

11

and the / 12 / 24

button

14

to set it to the desired value.

Tip: By keeping the

/ button

11

and

the

/ 12 / 24 button

14

pressed, you

accelerate the process and reach the desired

value more quickly. This quicker method can

also be used for making the other settings.

If during a period of 30 seconds no buttons

are pressed, the LC display returns automati-

cally to the default display.

3. Conﬁrm your settings by pressing the MODE

button

15

. The minute value of the time dis-

play

17

ﬂashes. Press the / button

11

and the

/ 12 / 24 button

14

to set it to

the desired value.

4. Conﬁrm your settings by pressing the MODE

button

15

. The second value of the time dis-

play

17

ﬂashes. Press the / button

11

or the

/ 12 / 24 button

14

to set the sec-

ond value to 0.

5. Conﬁrm your settings by pressing the MODE

button

15

. The year value ﬂashes in the time

display

17

. Press the / button

11

and

the

/ 12 / 24 button

14

to set it to the

desired value.

6. Conﬁrm your settings by pressing the MODE

button

15

. The month value of the date

display

16

ﬂashes. Press the / button

11

and the / 12 / 24 button

14

to set it

to the desired value.

94604_aur_Funk-Wetterstation_content_GB_FI_DK.indd 7 28.08.13 13:16

1

Hi,
My Auriol 433 MHz remote sensor has stopped working.
My main unit is working perfectly.
I confirmed that it was the sensor by borrowing another from a friend and his works OK with my main unit. (Obviously I have checked that my remote batteries are OK.)
Can I buy a new or second hand remote sensor anywhere.
George Walker, Bromley, UK Submitted on 24-7-2018 at 11:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Auriol Z31092 - IAN 94604 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auriol Z31092 - IAN 94604 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info