Manual Auriol Z31092 - IAN 94604 (page 6 of 69) (English, German, Dutch, Danish, French, Swedish, Finnish)

563992

6

Zoom out

Zoom in

Previous page

1/69

Next page

6 GB/IE

they have been given supervision or instruction

concerning use of the appliance in a safe way

and understand the hazards involved. Children

shall not play with the appliance. Cleaning

and user maintenance shall not be made by

children without supervision.

Under no circumstances should you take the

device apart. Repairs should only be carried

out by specialist personnel.

Safety instructions

for batteries

DANGER TO LIFE! Batteries can be swal-

lowed, which may represent a danger to life.

If a battery has been swallowed, medical

help is required immediately.

Remove the batteries from the device if they are

not going to be used for a prolonged period.

CAUTION! DANGER OF EXPLOSION!

The batteries must never be recharged!

When inserting the batteries, ensure the

correct polarity! This is shown in the battery

compartments.

If necessary, clean the batteries and device

contacts before inserting the batteries.

Remove spent batteries immediately from the

device. There is an increased danger of leaks!

Batteries must not be disposed of in the

normal domestic waste!

Every consumer is legally obliged to dispose

of batteries in the proper manner!

Keep batteries away from children. Do not

throw batteries into a ﬁre. Never short-circuit

them or take them apart.

Always replace all the batteries at once.

Use batteries of the same type only.

If the above instructions are not complied

with, the batteries may discharge themselves

beyond their end voltage. There is a danger

of leaking. If the batteries have leaked inside

your device, you should remove them immedi-

ately in order to prevent damage to the device!

Avoid contact with the skin, eyes and mucous

membranes. Any parts of the body coming

into contact with battery acid should be

rinsed oﬀ with copious amounts of water

and / or a doctor contacted if necessary!

Before initial use

Put the batteries first into the outdoor

sensor, then into the weather station.

Setting up devices

CAUTION! When selecting a location to

set up the devices, please ensure that they are

not exposed to any direct sunlight, vibrations,

dust, heat, cold or moisture. Do not place the

devices close to sources of heat, e.g. radiators.

Otherwise they may be damaged.

Place the weather station on the accompany-

ing base

35

.

Note: Please ensure that the pins in the

stand

35

are inserted into the corresponding

recesses on the weather station.

Do not place the devices on valuable or sen-

sitive surfaces unless these are appropriately

protected. Otherwise they may be damaged.

Do not place the devices near sources of in-

terference such as television sets, computers,

thick walls etc. Otherwise the transmission of

radio waves between the devices may be

impaired.

Please ensure that neighbouring devices are not

operated at the same frequency of 433 MHz.

Such devices may cause interference to the

radio connection.

Do not place the devices next to or on metal

plates. Otherwise the quality of radio wave

transmission may be reduced.

Do not install the devices in buildings made

of reinforced concrete, e.g. airports, high-rise

buildings, factories or cellars. Otherwise the

transmission of the radio waves between the

devices may be severely impaired.

Putting the outdoor

sensor into operation

Removing the battery safety strip:

Remove the battery compartment cover from

the back of the outdoor sensor.

Remove the battery safety strip. The outdoor

sensor is now ready for operation and the

control LED

36

lights up brieﬂy.

Close the battery compartment cover.

Installing the Outdoor Sensor:

Find an appropriate place for the outdoor sensor.

Note: Please ensure that you install the

outdoor sensor within a radius of 100 m

from the weather station. Check that there

are no obstacles between the outdoor sensor

and the weather station. Otherwise there may

be interference of the transmission of data.

For wall mounting:

Hang the outdoor sensor with the mount

38

on one screw.

Putting the weather

station into operation

Removing the battery safety strip:

Open the battery compartment

34

on the

back of the weather station.

Pull out the battery safety strip.

Then close the battery compartment

34

.

Press the RESET button

33

. All of the symbols

light up brieﬂy.

As soon as the battery safety strip has been

removed, the weather station starts to receive

the radio signal.

94604_aur_Funk-Wetterstation_content_GB_FI_DK.indd 6 28.08.13 13:16

1

Hi,
My Auriol 433 MHz remote sensor has stopped working.
My main unit is working perfectly.
I confirmed that it was the sensor by borrowing another from a friend and his works OK with my main unit. (Obviously I have checked that my remote batteries are OK.)
Can I buy a new or second hand remote sensor anywhere.
George Walker, Bromley, UK Submitted on 24-7-2018 at 11:59
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Auriol Z31092 - IAN 94604 at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auriol Z31092 - IAN 94604 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info