603185
9
Zoom out
Zoom in
Previous page
1/20
Next page
MX822 - Live mixer with 4 mics + 5 lines + 24-bit DSP, 10 FX and USB port
Page 9
English
6.3 - Master area
1
2
3
4
5
6
7 8
9
10
11
12
13
14
15
16
17
1 - Footswitch connector:
This Jack TS connector allows you to connect a footswitch in order to
use the effects processor remotely. It is hardwired as follows:
2 - - AUX/EFX Send output:
- AUX Output: Unbalanced signal from the AUX bus. Connect here a
monitoring system or effects processor.
- EFX Output: Unbalanced signal from the EFX bus. Connect here an
external effects processor or monitoring system.
Using this output deactivates the internal multi-effects.
3 - AUX Return L MONO and R inputs:
Line level mono Jack chassis. Signals received via these inputs are sent
to the AUX and Main L/R busses. These inputs are mainly used to receive
signals from an external effect (Reverb, Delay, etc.).
Note : These inputs can also be used like a standard line level aux
input. By connecting the L Mono chassis only, the signal will be sent
to both L and R sides.
4 - Main Output:
Balanced Jack TRS outputs. Signals sent to these outputs are the
cimbination of all incoming signals. Connect here the main amplification
system of your installation.
5 - EFX Select control knob:
Allows you to select effects. The processor features 10 factory presets,
this list is exhaustively detailed in chapter X. The processor is deactivated
when on "OFF".
6 - EFX control knob:
Allows you to adjust the signal level sent from the effects processor to
the Main bus.
7 - Control Room / Headphone control knob:
Allows you to adjust the sound levels of the Control Room and
headphones output.
8 - Main L/R control knob:
Allows you to control the volume output of all signals sent to the Main
Output (4).
9 - LED VU meter:
Double vertical VU meter with 10 LEDs. Allows you to visualise the main
volume output or per zone depending on the switches combination used
as explained previously. Level "0" refers to +4dB for outputs for which
+4dB is the nominal level.
10 - AUX Return control knob:
Allows you to control the signal quantity sent from the effect processor
to the AUX bus.
11 - Tape/CD / USB control knob:
This knob allows you to adjust the volume of the Tape/CD In and USB
inputs.
The USB connector is located on the rear panel. Please refer to chapter
Tip
Tip
Pole 2
Sleeve
Sleeve
Pole 1 / Ground
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiophony MX822 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiophony MX822 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audiophony MX822

Audiophony MX822 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info