603185
8
Zoom out
Zoom in
Previous page
1/20
Next page
MX822 - Live mixer with 4 mics + 5 lines + 24-bit DSP, 10 FX and USB port
Page 8
English
10 - Pan control knob:
This knob allows you to control the signal quantity sent to each ways
(L and R) of the Main bus. You can choose which side of the stereo
will send more signal.
If this knob is on the left e.g., the signal will be audible only on the left
side of your sound system.
11 - Channel faders:
This fader allows you to adjust the main channel volume by controlling
the signal quantity sent to the Main and EFX buses. This is especially
useful to balance your different sources such as instruments, voices,
etc.
We strongly recommend to position this fader on its lowest volume
(-) when a channel is not used, in order to prevent parasitic noises.
12 - Line level inputs (L MONO) (channels 3 and 5) via
Jack chassis:
Line-level inputs via Jack TS chassis (Mono). These inputs are
unbalanced. A signal sent to these inputs will also be sent to both
channels 9 and 11.
13 - Line level inputs (R) (canaux 4 et 6) via Jack chassis:
Line-level inputs via Jack TS chassis (Mono). These inputs are
unbalanced. when a signal is detected on these inputs, the concerned
area becomes stereo. This input affects the right side of your stereo
signal.
6.2 - Stereo area
1
2
3
4
1 - Stereo input:
Unbalanced input via RCA chassis.
2 and 3 - Stereo input:
Unbalanced input via Jack chassis.
Note : If connecting a source via the RCA inputs, do not connect another source via these Jack inputs.
4 - Balance control knob:
Allows you to adjust the balance. Unlike mono areas, stereos areas are double, this knob allows
you to adjust the signal quantity sent to both sides of this area before being sent to the Main bus.
Note :
- This zone do not have any gain settings.
- Other settings are similar to mono areas.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiophony MX822 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiophony MX822 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audiophony MX822

Audiophony MX822 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info