496152
9
Zoom out
Zoom in
Previous page
1/24
Next page
Page 4
RS232
Audio/Visual Connections
Picture Connections
Amplifier Connections
You will need a source of audio-visual signals such as a DVD
player to feed into your 8000AP
CD Players and standard DVD players should be connected
via the Digital SPDIF inputs (optical or co-axial). You will need
a single RCA digital cable for co-axial inputs or a TOSLink
optical cable for optical connections.
Tuners and other analogue sources should be connected via
a screened stereo RCA phono interconnect to the Analogue
stereo inputs.
HDMI enabled DVD players may be connected to the HDMI
input for audio and video signals via an HDMI cable - for
optimum sinal transmission this cable should be as short as
practicable.
The TV screen may be connected to the 8000AP via the HDMI
out socket. This will route video signals from the HDMI player
to the TV with minimal processing from the 8000AP. Again
keep the HDMI interconnect as short as possible.
A composite input on the TV screen may be connected to the
OSD socket on the 8000AP via a single RCA phono lead. This
is solely for the purpose of viewing the setup menu of the
800AP on the TV screen.
Finally connect the line outputs of the 8000AP to the power
amplifier (and subwoofer). You can connect any amplifier
from regular 2 channel stereo to a full 7 channel system. All
interconnects are RCA phono.
The connection diagram on this page shows a typical 7.1AV
system connected to source and amplification components.
If you are using a screen resolution of1080p ensure that
the input and output cables are HDMI approved - consult
your dealer for advice.
Always ensure that all components in your AV system are
switched off and disconnected from the mains supply
before making or changing any connections.
5: Basic System Connections
Page 7
C
DVD PLAYER
analogue
OUT
VIDEO
OUT
DIGITAL
OUT
TV MONITOR
SUBWOOFER
8000X7
8000CD
8000AP
TO LOUDSPEAKERS
HDMI
OUT
Composite
cable for Setup
on-screen display
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiolab 8000AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiolab 8000AP in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info