496152

Audiolab 8000AP Manual

7
Zoom out
Zoom in
Previous page
1/24
Next page
3: Audio and Video Connections
Make sure all system components are disconnected from the
mains before making or changing system connections!
Page 5
Analogue Inputs and Outputs
Digital Inputs and Outputs
Standard Analogue Inputs
Analogue Outputs
Tape Input and Output
Coaxial Digital Inputs
CD,
DVD, DX1
Your 8000AP has four regular analogue stereo inputs -
and . These are electrically identical and may
be used for any analogue stereo audio source.
There is a 5.1 analogue input, for
connection of a multi channel SACD or DVD Audio player.
This input is a straight-line pass-through input. The output
appears unchanged at the 5.1 outputs of the 8000AP.
These inputs should be connected to a suitable line output on
the source component using quality, screened, RCA phono
interconnects.
The
(Front Left)
(Front Right) (Left Surround) (Right Surround)
(Centre) (Left Back) and (Right Back) outputs should be
connected to the appropriate line inputs of your AV power
amplifier using quality, screened RCA phono interconnects.
The output should be connected to the line input of your
subwoofer using a high quality, well screened RCA phono
interconnect. Tale care not to run the interconnect parallel
with mains wiring and other potential interference sources.
VCR,
SAT, TV, AUX
L: R: LS: RS: C: SUB
L,
R , LS RS , C
,LB RB
SUB
8000AP can be configured to any multi-channel
combination, from stereo to full 7.1 output. The
The TAPE OUT is a line-level output of the currently selected
stereo analogue input. It is unaffected by the volume control.
This should be connected to the input of a suitable recorder.
The TAPE IN should be connected to the analogue output of a
recorder. If you have a three head recorder you can compare
the original and recorded sound during recording
Your 8000AP has three identical coaxial digital inputs -
(Digital Aux 1). These should be connected to the
SPDIF digital output on the source component using a quality,
screened, coaxial digital cable.
Optical Digital Inputs
DTV, DAB, MD,
DX2
Optical Digital Output
DIGITAL OUT
HDMI-DVI cables:
Your 8000AP has four optical inputs -
(Digital Aux 2). These should be connected to the
TOSLINK output on the source component using a quality,
optical cable. All connections are electrically identical
The signal at is an unmodified copy of the
currently selected digital source, i.e. it is unaffected by the
volume control or processing mode. It is not possible to route
an analogue source to the digital output. This should be
connected to a digital recorder such as a DAT or MD recorder.
There are two HDMI inputs. These should be connected via
an HDMI interconnect to the output of a DVD player or other
AV streaming device. They are identical.
The audio component of the HDMI input is stripped off and
routed through the processor. The processed output appears
at the analogue outputs of the 8000AP.
The HDMI output may be connected to an HDMI input on
your TV screen.
Apart from conducting the mandatory handshaking protocols
the video component of the HDMI signal is not processed by
the 8000AP. The video signal that appears at your TV is
entirely dependent on your DVD player or other source. To get
the best video result you should consult the handbooks of the
video source component and the TV.
HDMI interconnects carry very high freqiencies and levels of
information. For optimum results use high quality
interconnects and ensure that they are as short as possible.
A DVI enabled graphics card may be
connected to the HDMI input of the 8000AP. Likewise the
HDMI output may be connected to the DVI input of a
Computer monitor. In both cases a HDMI-DVI convertor will
be required. There are very real problems with computer
graphics cards and monitors when passing High Definition
Video signals. Even if they support HD, the lack of High
Definition Copy Protection (HDCP) circuitry in many products
means that HD signals will be blocked or downgraded to
standard definition video. If you are contemplating these
connections consult your manuals before proceeding.
HDMI Connections
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiolab 8000AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiolab 8000AP in the language / languages: English as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info