810506
17
Zoom out
Zoom in
Previous page
1/120
Next page
16
EN
of the chimney draught beginning has chimney without insertions (e.g. brick or ceramic), be-
cause its accumulation to operation temperature takes much longer. So, if the heat up or boiler
start up is problematic, consider recontruction of the chimney and equipping the chimney with
stainless insertions.
5.4.5 CONNECTION TO THE ELECTRICITY MAINS
The boiler is connected to the electricity mains of 230 V/50 Hz/10 A by an electrical cord with
plug. The mains input is type M and by replacing, it must by replaced with the same type by the
service organisation. Appliance must be placed with easy reach of the plug. The boiler must be
connected to the plug circuit with 10 A electrical circuit – breaker (following the STN EN 60 335 –
1 + A11:1997).
5.4.6 OPTION AND THE WAY OF CONNECTION OF THE CONTROL AND SAFETY
ELEMENTS
Boiler is delivered with basic equipment, regulation and control elements. It is necessary to pur-
chase other elements, which are not a part of delivery, but have to be installed in the heating
system. It is especially, valve against exceeding permitted pressure (figure 4) in the heating sys-
tem (we prescribe 2,5 bar), valve of the aftercooling loop of the boiler for draining excess
warmth out of the boiler to the waste and bleeding valve for correct function of the boiler. Ex-
pansion tank in the system must have sufficient volume, which is set by the project architect of
the heating system according to valid prescriptions. Electrical installation with sufficient equip-
ment of the boiler has to be performed by the specialist according to valid norms.
CAUTION! Heating system has to be equipped with
safety valve against exceeding pressure in the boiler
(2,5 bar). We recommand to place this valve on the riser pipe
of the boiler, always infront of the closing valve of the boiler
(or infornt of the OVENTROP). If the safety valve would not
be functional, excessive pressure would not be able to
leak and boiler might explode!
Pic. 4 Safety valve against overpressure
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK SLX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK SLX in the language / languages: English as an attachment in your email.

The manual is 12.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK SLX

ATTACK SLX Additional guide - English - 21 pages

ATTACK SLX User Manual - German - 112 pages

ATTACK SLX Additional guide - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info