810506
13
Zoom out
Zoom in
Previous page
1/120
Next page
12
EN
5 ASSEMBLY AND INSTALLATION OF THE BOILER
5.1 MANIPULATION WITH BOILER
Boiler is delivered on the pallet. Perform manipulation
with boiler only at the pallet. Put down the boiler form
the pallet immediately at the place of installation. It is
possible to perform this by use of manipulation cart or
by crane and handles, which are welded at the ex-
changer of the boiler.
Pic. 1 Manipulation with boiler with use of the wel-
ded handles
5.2 GENERAL CONDITIONS OF INSTALLATION
Only a person with valid authorization for installation and assembly of the heating technology
devices can install the boiler. The installation requires an appropriate project that is in line with
valid prescriptions. Technician must check the boiler before installing, if data given on the pro-
duction label are in conformity with data in the project and the documentation attached to the
boiler. The boiler connection must be in line with the valid prescriptions, norms, regulations and
this instruction manual.
WARNING: Producer takes no responsibility for damages caused by wrong connection
or operation!
5.3 BOILER PLACING
Boiler serves for installation and operation in the space with the basic environment (AA5/AB5)
according to STN 33 2000 – 1: 2009 – 04.
Boiler room must meet the following requirements:
Boiler is not suitable for use in the potentially explosive environment.
The temperature in the boiler room must not drop below the freezing point.
Boiler does not provide any lighting. Customer must ensure sufficient light source according
to the local norms and regulations.
It is necessary to consult the installation with the producer, if the boiler will be installed at
height above sea level exceeding 1 800 m.
Boiler room must have sufficient ventilation and inlet of the required burning air (minimally
10 cm
2
/kW of the boiler output). Hole for the ventilation should be designed to not let the
outside weather influence its function. (rain, snow, wind)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK SLX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK SLX in the language / languages: English as an attachment in your email.

The manual is 12.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK SLX

ATTACK SLX Additional guide - English - 21 pages

ATTACK SLX User Manual - German - 112 pages

ATTACK SLX Additional guide - German - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info