810507

ATTACK Pellet 30 Automatic Plus Manual

42
Zoom out
Zoom in
Previous page
1/60
Next page
40
INSTALLATION OF OPERATING MODULES
The module cover is not dust and water resistant. To protect against these factors, it is
necessary to install a suitable cover. The enclosure shall ensure a degree of protection
corresponding to the environmental conditions in which the regulator will be used. In
addition, it must allow the user access to parts under dangerous voltage - e.g. terminals. A
standard cover can be used for installation. In that case, the user shall only have access to
the front surface of the service module. The cover can also consist of boiler parts that
surround the entire module. The operating module is designed to be mounted on DIN
TS35 standard rail. Mount the rail firmly on a solid base. Before placing the module (1) on
the rail (2), lift the handles (3) up with a screwdriver. After attaching the modules to the rail,
push the mounts (3) to their original position. Make sure that the device is fixed steadily
and cannot be folded off the rail without the use of tools.
Module installation options, a) - in a module cover with access to the front surface, b) - in a cover without access to the
front surface, 1-module, 2 - DIN TS35, 3 - handles.
For safety reasons, it is necessary to maintain a safe distance between the active parts of
the terminals of the operating module and the conductive (metal) parts of the cover (at
least 10 mm).
The connecting cables must be protected against tearing, loosening, or must be installed
in such a way that no load is transmitted to hold the cables in the terminals of the
controller.
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK Pellet 30 Automatic Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK Pellet 30 Automatic Plus in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK Pellet 30 Automatic Plus

ATTACK Pellet 30 Automatic Plus User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info