810555
13
Zoom out
Zoom in
Previous page
1/28
Next page
Setting /termination of mode LE: the buttons , and choose the number of parameter
Reduce the temperature requested on the control panel you want to set. By pushing you are able to set the
by pushing the button to 30° C and after next pushing value of the parameter. By its confirmation, by pushing
on the display there is LE, confirm it and you are the new value of the parameter is now in memory
now in the mode Summer. and the boiler turns back to the mode before setting
If you don't confirm your setting by pushing , the boiler with new parameters set by the user.
turns to setting before.
Stop the operation mode summer by pushing and by The user is able to set only parameters 1 4.
setting the heating water temperature and by its Parameters 5 7 could be set only by an authorized
confirmation . The boiler heats now in the operation service man or by a producer and are blocked.
mode heating water (see the point 2.3.1). Description of parameters:
Пl - option of pump type running out after termination of
2.3.4 Operation mode Stand-by (РГ)request for heating.
The boiler doesn't heat and also doesn't heat service 0 - there is not and pump running out, the pump is
utility water. There is only the antifreeze function on (if it switched off with a last heating element
is not blocked by the parameter 4) and deblocking pump 1 - pump running out is controlled by the parameter 2
function (1x per day pump turning through). We set and after termination of request for heating the time
is counting down till switching off the pump
recommend using this function in case of putting the
2 - pump running out is controlled by the temperature
boiler out of the operation to elongate pump life time and of heating water set by the parameter 3 and after
protect heating system against freeze. termination of request for heating the pump is on till the
temperature of heating water fall down on the
Going to the operation mode Stand-by: (РГ): temperature value set.
Push the button for a long time (minimally 3 s, during П2 - setting of time of pump running out after
this period on the display there is lighting Пl) and the termination of request for heatingí.
boiler got to the operation mode Stand-by, on the display П3 -setting of temperature of heating water that the
now there is lighting РГ. If you want to go back to setting pump is in operation in after termination of request for
point, push shortly the button . heating.
П4 - ON/OFF antifreeze function (see the chapter safety
2.4. Setting of boiler parameters functions).
Summary of parameters: П5 - setting of the value of regulating constant P, setting
only by a producer!
Setting of parameters:It is necessary to push П6 - setting of the value of regulating constant I, setting
shortly the button for setting all the parameters only by a producer!!
(operation mode of heating water, operation mode of П7 - setting of hysteresis for the temperature in ° C
service utility water or operation mode Summer. Using
13
parameter specification value setting
scale
producer
setting unit responsible person for
setting
Π1
pump running out:
0=none; 1=time running out;
2=temperature running out 0, 1, 2 1 - user
Π2time of pump running out 1 to 30, step 1 4 min. user
Π3temperature of pump running out 25 to 70,step 1 40 °C user
Π4antifreeze protection: 0=NO; 1=YES 0, 1 1 - user
Π5regulation constant P 1 to 20 6 - producer
Π6regulation constant I 1 to 50 3 - producer
Π7temperature hysteresis 1 to 10 2 °C authorized service man.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK Electric Easy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK Electric Easy in the language / languages: English as an attachment in your email.

The manual is 4.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info