810510
64
Zoom out
Zoom in
Previous page
1/100
Next page
63
EN
Possible causes of burner faults
Error
code Possible cause Actions to correction
10 Feeder does not supply enough of pellets.
Empty pellet container.
Faulty ignition fuse.
Faulty ignition spiral.
Photocell needs to be cleaned.
Set the pellet ration.
Fill the container.
Replace the fuse. (6.3 A).
Replace the spiral. (48 Ώ +/− 5 %).
Clean the photocell.
11 Feeder does not supply enough of pellets.
Empty pellet container.
Faulty ignition fuse.
Faulty ignition spiral.
Photocell needs to be cleaned.
Set the pelletration.
Fill the container.
Replace the fuse. (6.3 A).
Replace the spiral. (48 Ώ +/− 5 %).
Clean the photocell.
12 Short circuit or other fault of the photocell. Replace the photocell.
13 Too high temperature in the boiler room. Prevent from the heat leakage.
14 Faulty sensor of thermostat Replace the sensor.
15 Faulty sensor of thermostat Replace the sensor.
16 Faulty circuit board Replace the circuit board.
18 Ventilator runs, while the burner is in pause mode. Replace the circuit board.
19 Ventilator does not run, when it should. Change the ventilator fuse
(800 mA); check the connections;
replace the ventilator
20 Ventilator runs too slowly Clean the ventilator; replace the
ventilator
21 First ignition trial failed Set the pellet ration.
22 Pellet feeder missing Connect the pellet feeder
23 Incorrect pellet supply Set pellet ration.
24 Incorrect amount of pellets supplied.
Faulty photocell
Set the pellet ration.
Replace the photocell.
25 Cleaning does not work Check the connection between
the circuit board of scraper and
the main circuit board.
26 Cleaning is slow Clean the grate
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info