810510
59
Zoom out
Zoom in
Previous page
1/100
Next page
58
EN
Maintenance once a year or in a case of need (by a qualified person)
Start the burn–down by the menu buttons and wait, until the fuel in the burner burns–out. Turn
the burner off by the burner switch and by the main switch, plug out the mains cord of the boiler
from the mains socket. Open the door with burner to cca 90°.
1. Put down the burner cover and wipe the photocell by a rag and a soft abrasive agent (tooth
paste). Be carefull by the flat cable of display and buttons!
2. Clean the air wings of the fan. The most suitable way is to blow them with compressed air.
3. Screw out the scrape and ignition board.
4. Clean the space behind the ignition board.
5. Scrape ignition board and scraper.
6. Brush the grate utterly and clean the holes in the grate.
7. Mount all the parts back.
8. Clean the container and the pellet feeder from dust and small dirts.
9. Check state of the inlet hose for pellets.
10. Put the pellet feeder into operation by plugging of the feeder´s mains cord into the mains
socket (230 V~) to fill it with pellets.
11. Set the amount of pellets to be supplied.
10.2 INSTALLATION AND REPLACEMENT OF THE FIREPROOF PARTS
If you want to make exchange or control of fireproof parts, follow these steps:
1. Start–up the fan
2. Clean the boiler from combustion residues, ash, dust and tars
3. Remove glass sealing cords as shown at the picture
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info