Manual ATTACK DPX Combi Pellet (page 14 of 100) (English)

810510

Zoom out

Zoom in

1/100

2.4.6 CONNECTION WITH EXTERNAL PELLET TANK AND PELLET FEEDER

To the boiler ATTACK DPX COMBI Pellet is recommend to use ATTACK pellet tank in combination

with screwed ATTACK pellet feeder, length about 2 m. Pellet tank is possible to place on the

right or the left side of the boiler, where necessary. For 30 kW burner there is recommend-

ed PED200 feeder. Feeder PED210 is recommended for 50 kW burner. Between hole of

feeder and delivery tube on the burner should be a height difference at least 300 mm. In the

horizontal direction should be space between the hole of feeder and delivery tube at least 150

mm (i.e. not vertically aligned).

Before first starting up of the burner it is necessary to make setting of feeder (p. 58). For setting

of the feeder it is necessary to load the pellet tank with sufficient amount of pellets and load the

pellet feeder with connection to the mains until the pellets begin falling down of the top hole of

the feeder. Connect the feeder to the burner outlet. After correct setting of the feeder, install the

inlet hose between the outlet tube of feeder and the delivery tube of burner and adjust the

length of the hose. The hose should not be straight and also not so bented to prevent the pellets

inside of stacking and accumulating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

ATTACK DPX Combi Pellet Manual

Product: