769379
17
Zoom out
Zoom in
Previous page
1/34
Next page
Atomos Ronin – User Manual Edition 2: November 2012 15
Connect to input
As soon as you connect a supported input to the Ronin’s SDI input:
Rec and Mon icons will go solid and colourful
• The input format will be shown in the top left corner
• Audio inputs will show levels in bottom left corner
READY-TO-RECORD
NO INPUT / NO DISK
NO INPUT / DISK PRESENT
INPUT PRESENT / NO DISK
Before recording
• Check there is a valid signal by looking at the main screen, ensuring it
looks like the ‘ready-to-record’ screen
• Check the input signal is set to what you would like:
- Progressive with 2:2 or 3:2 pulldown or
- Interlaced
• If you see No Input for any reason please check your camera
settings match a supported format for Ronin. See technical
specifications on page 33.
• Connect headphones and monitor the Audio channels to make sure
the sound levels are correct.
• Select the correct audio recording set from the audio menu.
• Connect any additional Analogue audio inputs and adjust gain
accordingly.
• Enter monitor mode to ensure the video is coming in as expected.
• Check you have the correct Scene & Shot number selected.
(see page 21 – Organising Material on disk)
• Check your drive is inserted and has been formatted
• Check your timecode settings are as you need
• Choose how you will start/stop your recording
• Check for clean input:
By touching the screen in Monitor mode, you can remove the
Atomos overlays to give you a clean screen. If any overlay graphics
remain, these will be coming from your camera. Please check the
settings on your camera to switch these off.
Activate pulldown removal if required
You can select the recording format by touching the top middle of the
touch screen where the format is indicated.
IMPORTANT: You need to match the format you are recording
internally on the camera with the format recorded on the Ronin.
If you are recording 24p internally on the camera you need to record
24p on the Ronin so the recordings match. To adjust the recording
format simply touch the format icon repeatedly and the Ronin will cycle
through the options available. The basic rule is match the format of
the internal recording on the camera (not the external output of the
camera). For more explanation on choosing the correct format on the
Ronin and the relationship to camera internal format and output format
refer to Section 10 – Pulldown.
8. Monitoring and Recording
The Ronin has a high-quality screen that adjusts to the scan frequency
of the incoming signal, for a smooth, accurate display.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos Ronin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos Ronin in the language / languages: English as an attachment in your email.

The manual is 2.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info