769379
16
Zoom out
Zoom in
Previous page
1/34
Next page
Atomos Ronin – User Manual Edition 2: November 2012 14
Audio
Located in the bottom left corner of the main screen you can see the area
for monitoring the audio levels, pressing here will allow you to access the
audio settings.
You can see 12 digital channels (via SDI input) and 2 analog audio
channels (via the XLR inputs). Each channel has a level meter assigned
to it. When there is active sound coming in you will see the level indicator
moving.
If the ‘R’ icon is highlighted red below the level meter these channels will
be recorded to disk (this is also indicated by the level meters background
changing to orange). If the headphone icon is highlighted this channel
pair will be output to both the headphones and the XLR outputs.
If recording analog audio via the XLR inputs the input gain can be
adjusted by pressing the + and - buttons to set a suitable level to match
the source. Since the analog input connections are line level, they cannot
be used with microphone level sources. Ronin does not supply +48 volts
phantom power for microphones. An adaptor is necessary to operate
with microphone level equipment.
Similarily, The analog output is also balanced line level XLR type. If you
wish to adjust the clipping point of the analog XLR outputs this can be
set by pressing on the Line Out Level indicator. The clipping level settings
are +15 dBu, +18 dBu, +22 dBu, and +24 dBu.
There is also a slider to control the headphone level. Press any point
along the line or slide your finger to the left or right to adjust. On the front
panel, there is also a mute button for the headphones along with a toggle
switch that allows you to select between mointoring the left/right or both
channels of each audio pair.
It is not possible to vary the gain if the signal input is from the SDI
connection because this is digital and is embedded in the signal.
You can usually adjust this from the camera, please see your camera
manual for operational details.
Audio During Playback Mode
When you enter into Playback mode on the Ronin it will only output
channels 1/2 on the headphones and XLR outputs, please bear this in
mind when you select the audio channels for recording. Also note, all
recorded audio channels will be present on the SDI output.
7. Using the Ronin
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos Ronin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos Ronin in the language / languages: English as an attachment in your email.

The manual is 2.5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info