580229
24
Zoom out
Zoom in
Previous page
1/48
Next page
2-8
10. Install the top of the mount (9) and tighten four screws (10) to
finger tight.
11. Slightly loosen the two fixing screws (11) on the top rail (12).
12. Place the top rail onto the Picatinny rail on the top of the
mount.
13. Tighten the fixing screws of the top rail.
14. Place the Night Vision Front Sight (13) onto the top rail at front
of the scope. The light suppressor of the front sight should
cover the riflescope objective lens.
15. Place the infra-red illuminator (14) atop of the top rail.
NOTE
There are two sets of inserts for scopes with 25.4 mm and
30 mm tubes diameter.
You can quickly change your system back from night vision to day.
Simply unscrew two fixing screws of the top rail and take off the
top rail together with the front sight and IR illuminator.
NOTE
The fixing screws may need to be tightened after continuous
shooting.
2.1.6. REMOTE CONTROL
Remote control is designed to operate the PS28 in short-time ac-
tivation mode.
Attach the remote control to the PS28 and use it as follows:
FIGURE 2-7. REMOTE CONTROL
CONNECTOR
REMOTE
CONTROL
CONNECTOR
REMOTE CONTROL
VELCRO TA PE
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATN PS28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATN PS28 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info