580229
25
Zoom out
Zoom in
Previous page
1/48
Next page
2-9
1. Remove the rubber cap from the connector. The rubber cap
can be placed onto the screw head, that attached the strap of
cap to the body of device (see Figure 2-7).
2. Attach the remote control to the connector and secure with the
captive nut.
3. Place the remote switch on the fore-end of rifle stock and with
Velcro tape.
2.1.7
. IR450 ILLUMINATOR
IR450-B4 illuminator provides the capability for operator to use
the PS28 under extremely low light conditions and in total dark-
ness. The IR illuminator can be mounted on rail of the Platform
Ring, or on top rail of the B.A.M. system (see Figure 2-6), or of the
Scope Mounting System.
IR450 Installation:
1. Loosen the fixing nut of IR450.
2. Install the IR450 onto the Picatinny rail.
3. Tighten the fixing nut of IR450 tightly.
The ATN IR450 is powered with one CR123A lithium battery.
FIGURE 2-8. IR450-B4
BATTERY HOUSING
FIXING NUT
IR ELEVATION
ADJUSTMENT
IR WINDAGE
ADJUSTMENT
IR FOCUSING
NUT
POWER LED INDICATOR
ALLEN KEY
WRENCH
IR BRIGHTNESS ADJUSTMENT
BATTERY
HOUSING CAP
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATN PS28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATN PS28 in the language / languages: English as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info