810412
39
Zoom out
Zoom in
Previous page
1/66
Next page
Operation and Maintenance Manual - EN
EN
www.atmos.cz EN-39
• Parameter S38 – deactivation difference for parameter S37, of the pump in the boiler circuit
(S14 = 13 or S6 = 13)… (2 K)
If the temperature of the boiler TK drops by more than the deactivation difference S38, the pump
in the boiler circuit will be turned off in the OPERATION or STOP (burn-out) modes.
• Parameter S39 – characterizes the emergency temperature of the boiler TK, during which the
pump in the boiler circuit will be activated (S14 = 13 with modules AD02 or AD03)… (93 °C)
Activation will be carried out regardless of special functions of the burner (function S40). The
function works based on the deactivation difference specified in parameter S38.
• Parameter S40 – is the function for after-running of the pump in the boiler circuit used based on
boiler type (S14 = 13, S6 = 13)… (0)
a) S40 = 0…. The automatic deactivation function for the pump in the the boiler circuit after the
pellet burner burns out is off (after the time specified in parameter T5 runs out). The pump will
be switched off after the temperature of the boiler TK drops (S38, S39). Designated for ceramic
boilers with a large momentum (with the option of stoking with wood).
b) S40 = 1... The automatic deactivation function for the pump in the boiler circuit after the pellet
burner burns out is on. The pump will be switched off immediately after the burner burns out, after
the time specified in parameter T5 runs out. The function designated by parameter S39 is active.
Designated for boilers with minimal momentum without ceramics (D14P, P14, D21P, P21, D25P, P25).
• Parameter S41 - is the function for automatic cleaning of the burner by compressed air after a
certain number of work cycles (burn-outs). The function utilizes both reserve outputs (S16 = 16,
S14 = 15) – nonstandard function… (11)
a) S41 = 1 - 9… function when the cleaning of the burner will be performed only once after
running a given number of cycles (1, 2, 3, 4, 5, 6, 7, 8, 9 - number of cycles)
b) S41 = 11 - 19… function when the cleaning of the burner will be performed always twice after
running a given number of cycles (11 = 1, 12 = 2, 13 = 3, 14 = 4, 15 = 5, 16 = 6, 17 = 7, 18 = 8,
19 = 9 - number of cycles)
If the parameter S41 = 0 or 10, the function is turned off.
• Parameter S42 - is the function for automatic cleaning of the burner by compressed air after a
certain period of operation. On the subsequent termination of a work cycle (burnout), the burner
mouth will be cleaned. The function utilizes both reserve outputs (S16 = 16, S14 = 15)… (4 hours)
After the time S42 runs out the pellet burner burns out and cleans. AUTO STOP will be shows on
the burner screen.
The set value represents the actual time in hours.
• Parameter S43 - is the function for automatic cleaning of the burner by compressed air after
a certain period of operation. After the set period elapses, the burner will immediately stop, be
cleaned and re-started if necessary and all conditions for START are met (regardless of parameters
S41 and S42). The function utilizes both reserve outputs (S16 = 16, S14 = 15)… (4 hours)
The set value represents the actual time in hours.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atmos A85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A85 in the language / languages: English as an attachment in your email.

The manual is 2.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atmos A85

Atmos A85 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info