Manual Atmos A25 (page 53 of 96) (English)

810409

Zoom out

Zoom in

1/96

Operation and maintenance manual - EN

www.atmos.cz EN-53

AD02 or AD03 module under the instrument hood of the boiler and connect it electrically

between the boiler terminal board and the extraction fan, see the wiring diagram.

This setting and connection with AD02 or AD03 module and special connector (jumper to main

switch) is standardly used for DCxxSP, CxxSP, ACxxSP boilers with the function for automatic

start after wood is burnt out activated (AUTOSTART – S34 = 1 or S34 = 2). Boiler exhaust

fan is running simultaneously with the pellet burner during the AUTOSTART function.

e) S6 = 5…… Reserve function as the output function for the Z1 ignition spiral when the reserve

copies the run of the ignition spiral.

f) S6 = 6….. Cleaning function of the combustion chamber or grill (flap). If the burner is in the

normal START, RUN and STOP mode, the output is not energized. The output is only energized

for the limited time T11, which continues immediately after the expiration of time T5 in the

STOP mode. It is not used with the A25 burner.

g) S6 = 7….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor (cycles between time T4 and T6). The

reserve output work independently of the condition of the actual output for the external worm

conveyor. This means that if the standard output for the external conveyor gets damaged, the

reserve will work independently in accordance with the same program, and therefore it can be

used as a replacement for the damaged output.

h) S6 = 8….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor (cycles between time T4 and T6). The

reserve works in dependence on the status of the actual output for the external worm conveyor.

This means that if the output for the external conveyor gets damaged, the reserve will be switched

off automatically. This function is suitable in situations when you need to control another external

conveyor that supplies (feeds) pellets from a larger distance to the main conveyor from which the

pellets fall directly to the burner.

i) S6 = 9….. Reserve function as the output function for the external worm conveyor, when the

reserve copies the run of the external worm conveyor, but with the difference that it does not cycle, but

runs permanently both during the drawing of the ignition amount and during both the times T4

and T6. Thus, the other external conveyor runs continuously and works independently of the status

of the actual output for the external worm conveyor. This means that if the output to the main external

conveyor from which pellets directly fall to the burner gets damaged, the reserve will keep working

independently. This function can be used in cases when you need to control another external conveyor

that supplies (feeds) pellets from a larger distance to a pellet bin at the boiler from which the main

external conveyor draws pellets to supply them directly to the burner. Caution - the other external

conveyor must always be controlled with an additional level sensor (level meter) that will maintain the

level of pellets in the pellet bin at the boiler.

j) S6 = 10….. Reserve function as the output function for the external worm conveyor, when

the reserve copies the run of the external worm conveyor, but with the difference that it does not

cycle, but runs permanently both during the drawing of the ignition amount and during

both the times T4 and T6. Thus, the other external conveyor runs continuously, but it works in

dependence on the status of the actual output for the external worm conveyor. This means that if

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A25 in the language / languages: English as an attachment in your email.

The manual is 16.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atmos A25

Atmos A25 User Manual - German - 70 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atmos A25 Manual

Product: