520774

Atika BSV315 Manual

22
Zoom out
Zoom in
Previous page
1/160
Next page
21
6. Open upper door and turn the band saw roll several times
manually clockwise so that the guidance rolls set in the cor-
rect positions
° both guidance rolls must abut slightly on the saw band.
7. Refasten screws (M).
8.
Close upper case door.
30
Adjust support roller:
1. Release locking lever (N).
2. Press support roller (O) against saw band so that it abusts
slightly on the saw band.
3. Refasten locking lever (N)
Adjusting lower band guidance
The lower band guidance consists of:
° two guide pins (these guide the saw band laterally)
° a support roller (this supports the saw band from behind)
Readjust the guide pins and support roller after each
saw band exchange and each saw band adjustment.
L Guide pins and support roller are wearing parts. Check
these regularly and replace the pins and roller in case
of wear at the same time.
26
1. Release the 2 release handle on the bottom side of the
guidance gib (26).
2. Take off the guidance gib (26).
9
3. Release the 4 nuts and washers on the saw table guidance
(20) and take off the saw table (13).
31
Adjust guide pins:
1. Release screws (P).
2. Adjust the holder (Q) in a way that the guide pins (R) start
app. 1 mm behind the teeth ground.
3. Fasten screws (P).
4. Press guide pins (R) against the saw band.
32
5. Open upper door and turn band saw roll several times
manually clockwise that the guide pins set in the correct
position
° both guide pins must abut slightly on the saw band.
6. Refasten screws (S).
7.
Close upper case door.
33
Adjust support roller:
1. Release screw (T).
2. Press support roller (U) against saw band so that it abusts
slightly on the saw band.
3. Refasten screw (T).
4. Guide the table again over the saw band and screw it on at
the saw table guidance.
5. Refasten the stopper guidance profile (26).
Transport
Remove mains plug before each
transport.
L
Transport the saw only with:
− the upper saw band guidance positioned completely
downwards
−
unscrewed jutting out accessories
Storage
Remove the mains plug from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
− thoroughly clean the saw
− treat all movable parts with an environmentally friendly
oil
L
Never use any grease!
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BSV315 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BSV315 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Turkish as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info