701023
22
Zoom out
Zoom in
Previous page
1/146
Next page
22
Adjust support roller:
1. Release screw (N).
2. Adjust support roller (O).
Distance between support roller and saw band app.
0.5 mm
Is the saw band moved manually it shall not touch
the support roller
3. Refasten screw (N).
Adjusting lower band guidance
The lower band guidance consists of:
two guide pins (these guide the saw band laterally)
a support roller (this supports the saw band from behind)
Readjust the guide pins and support roller after each
saw band exchange and each saw band adjustment.
Guide pins and support roller are wearing parts. Check
these regularly and replace the pins and roller in case of
wear at the same time.
To adjust the guide pins:
1. Open lower case door.
2.
Release screws (P / Q).
3. Press the guide pins (R / S) against the saw band.
4. Open upper door and turn band saw roll several times
manually clockwise that the guide pins set in the correct
position
Both guide rollers must abut slightly on the saw band.
5. Refasten screws.
6.
Close both case doors.
Adjust support roller:
1. Screw off the saw table plate (6) and the cover (23)
2. Open lower case door.
3.
Release screw (T).
4. Adjust support roller(U).
Distance between support roller and saw band app.
0.5 mm
Is the saw band moved manually it shall not touch the
support roller
5. Refasten screw.
6. Refasten the saw table plate (6) and the cover (23)
7.
Close again the case door.
Replacing the rubber belts
The band saw rolls (5 / 13) are provided with rubber
belts (24). Worn out or damaged rubber belts must be
immediately replaced.
1. Open the case doors (2 / 4).
2. Remove the saw band ( "Replacing the saw band" on
page 21).
3.
Using a screw driver lift the rubber belt (24) and pull it
off from the band saw roll.
4. Fit a new rubber belt on the band saw roll.
5. Fit the saw band.
6.
Close the case door.
Replace table insert
Replace a worn-out or damaged table insert
immediately.
Push the table insert (9) from below out of the saw table
and replace it by a new table insert.
Transport
Remove mains plug before each transport.
Transport the saw only with:
the upper saw band guidance positioned completely
downwards
unscrewed jutting out accessories
Storage
Remove the mains plug from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
thoroughly clean the saw
treat all movable parts with an environmentally friendly
oil
Never use any grease!
Guarantee
Please note the attached guarantee declaration.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BS 205-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BS 205-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atika BS 205-2

Atika BS 205-2 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info